Dymo MimioClassroom User Manual page 98

Customizing MimioStudio
These preferences are only used when your MimioTeach device is used to capture digital
ink.
To adjust the preferences for a MimioTeach device
1. Choose the device to adjust from the Device list.
2. Make the changes you want to the preferences.
3. Click Apply.
To adjust surface size for a MimioTeach device
To adjust the pen preferences
1. Click Pens.
2. Choose the MimioCapture pen to adjust from the Pen list.
3. To adjust the line thickness of the pen, drag the Pen Width slider.
4. To adjust the pen color, select a color from the Pen Color palette.
5. Click OK.
To create a combined surface
1. Connect two or more MimioTeach devices and two or more MimioCapture devices to
2. Set the surface size for each MimioTeach device.
3. Click Combine.
4. Choose the arrangement of your combined surfaces from the Extend Surface Styles list.
5. Press the New Page button, , on each MimioCapture tray, in the order shown.
6. Enter a name for your extended surface in the Extend Surface Name box and click OK.
To view device information
To reset to the default device preferences
90
MimioCapture devices
You can combine up to four different surfaces.
Do one of the following:
Choose a size from the Surface Size list.
l
Choose Custom from the Surface Size list and enter the desired values into the
l
Width and Height boxes.
Click Auto Size and touch a MimioCapture pen at the location shown in the Auto
l
Size dialog box.
The Pens dialog box appears.
Alternately, enter a value into the Pen Width box.
For additional color choices, click More Colors.
your computer.
The Create extended surface dialog box appears.
You can combine up to four different surfaces.
Click Preferences.
The dialog box appears showing the device information, environmental analysis, and
device memory.
Click Defaults.