Adjusting The Sound Characteristics; Changing The Bbe Mp Setting - Sony CDX-F5700 Operating Instructions Manual

Changing the operative direction
The operative direction of controls is factory-set
as shown below.
To increase
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
.
Press ~ for 2 seconds while
pushing the VOL control.
Tip
You can also change the operative direction of these
controls with the unit (page 21).
20
Adj
usti
ng the sound
characteristics
You can adjust the bass, treble, balance, fader,
and subwoofer volume.
1
Press ~ repeatedly to select
the desired item.
Each time you press ~, the item
changes as follows:
BAS (bass)
-+
TRE (treble)
-+
BAL (left-right)
-+
FAD (front-rear)
-+
SUB (subwoofer volume)
2
Rotate the volume control dial to
adjust the selected item.
Note
Adjust within 3 seconds after selecting the item.
Tips
.
When adjusting with the card remote commander,
press ( SOUND) repeatedly and then press
(SEEK) (+)or(SEEK) (-). .
When adjusting with the rotary commander, press
( SOUND) repeatedly and then rotate the VOL
control.
Changing the BBE M P setting
The BBE MP process effectively adds warmth
and provides clear CD quality sound even from
heavily compressed MP3 material.
During playback on this unit, press
W (BBE MP) to select "BBEMP-ON."
To cancel the BBE MP, select "BBEMP-OFF."
Note
The BBE MP function is available only when playing
back on this unit (when playing back on the optional
unit, BBE MP is not available).
Tip
You can change the BBE MP setting only when
playing back on this unit.