Installation Satellite - Philips 55PUS7909 User Manual

not subscribe to pay TV channels or services, you can select
Free Channels Only.
For more information, press the colour key
look up CAM - Conditional Access Module.
Reception Quality
You can check the quality and signal strength of a digital
channel. If you have your own antenna, you can reposition the
antenna to try and improve the reception.
To check the reception quality of a digital channel...
1 - Tune to the channel.
2 - Press  and press  (left) Setup.
3 - Click General Settings > Antenna/Cable Installation and
click Test Reception.
The digital frequency is shown for this channel. If the reception is
poor, you can reposition your antenna. To check the signal
quality of this frequency again, select Search and press OK.
To enter a specific digital frequency yourself, use the remote
control digit keys. Alternatively, select the frequency, position the
arrows on a number with  and  and change the number with
 and . To check the frequency, click Search.
If you use DVB-C to receive channels, the options Symbol Rate
Mode and Predefined Symbol Rates are available. For Symbol
Rate Mode, select Automatic, unless your cable operator gave
you a specific symbol rate value. To enter the symbol rate value,
use the number keys.
Manual Installation
Analogue TV channels can be manually installed, channel by
channel.
To install analogue channels manually...
1 - Press  and press  (left) Setup.
2 - Click General Settings > Antenna/Cable Installation and
click Manual Installation.
• System
To set up the TV system, click System.
Select your country or the part of the world where you are
now.
• Search Channel
To find a channel, click Search Channel. Click Search. You can
also enter a frequency yourself. If the reception is poor, press
Search again. If you want to store the channel, click Done.
• Store
You can store the channel on the current channel number or as
a new channel number.
Select Store Current Channel or Store as New Channel.
You can redo these steps until you have found all available
analogue TV channels.
 Keywords and
79
24.10

Installation Satellite

Installing Satellites
About Installing Satellites
This TV has two built-in satellite DVB-S/DVB-S2 tuners.
Up to 4 Satellites
You can install up to 4 satellites (4 LNBs) on this TV. Select the
exact number of satellites you wish to install at the start of the
installation. This will speed up the installation.
Unicable
You can use a Unicable system to connect the antenna dish to
the TV. You can select Unicable for 1 or for 2 satellites at the
start of the installation.
MDU - Multi-Dwelling-Unit
The built-in satellite tuners support MDU on the Astra satellites
and for Digiturk on the Eutelsat satellite. MDU on Türksat is not
supported.
Start the Installation
Make sure your satellite dish is connected correctly and is
perfectly aligned before you start the installation.
To start the satellite installation...
1 - Press  and press  (left) for Setup.
2 - Click Satellite Installation and click Start.
3 - Click Install Satellites and confirm with Reinstall. The TV
shows the current satellite installation setup.
If you want to change this setup, click Settings. Go to step 3b.
If you don't want to change the setup, click Search. Go to step
5.
3b - The TV has 2 built-in satellite tuners. According to how
many satellite dish cables you have connected –1 or 2,
select One Tuner or Two Tuners. If you use a Single Cable
system (Unicable or MDU), always select Two Tuners.
4 - In Installation System, select the number of satellites you
want to install or select one of the Unicable systems. When you
select Unicable, you can choose the User Band Numbers and
enter the User Band Frequencies for each tuner. In some
countries, you can adjust some expert settings for each LNB
in More Settings.
5 - The TV will search for the satellites available on the
alignment of your antenna dish. This may take a few minutes. If a
satellite is found, its name and reception strength are shown on
screen.
6 - When the TV found the satellites you need, click Install.
7 - If a satellite offers Channel Packages, the TV will show the
available packages for that satellite. Click on the package you
need. Some packages offer a Quick or Full install for their