Door Assembly; Remove And Re-Install - Electrolux EI15TC65HS Technical & Service Manual

10 Section B – Cabinet

Door Assembly

REMOVE AND RE-INSTALL

Made from brushed stainless steel and insulated to
help deaden sound, the heavy-duty door could become
dented, scratched or bent. Removing the door is also
essential for servicing the compactor's inner mechanical
and electrical components.
IMPORTANT: Firmly support the door during removal
and re-installation.
TOP HINGE
DOOR
BOTTOM HINGE
HEX SOCKET
HEAD SCREWS
SCREWS
1. Use an appropriate size hex wrench to remove the
two hex socket head screws from the top hinge.
Holding the door in place, remove the upper hinge
from the door assembly.
2. Carefully lift the door off of the two pegs found on
the door assist components, which are part of the
bottom hinge, and put it aside.
PEGS
DOOR ASSIST
COMPONENTS
3. To re-install, lift the door onto the lower hinge, making
sure to align the door assist pegs with holes on the
bottom of the door. Re-install the upper hinge into
the door and secure to the cabinet using the two hex
socket head screws.