Sound Menu; Stereo / I • Ii; Bass; Treble - JVC AV-32T5SK, AV-32T5BK, AV-28T5SK, AV-28T5BK, AV-32T5SR, AV-32T5BR, AV-28T5SR, AV-28T5BR Instructions Manual

SOUND menu

SOUND
STEREO/

BASS

TREBLE

BALANCE

HYPER SOUND

TV OK
D0019-EN
STEREO / I • II
When you are viewing a bilingual broadcast
programme, you can choose the sound from
Bilingual I (Sub I) or Bilingual II (Sub II). If
you have poor reception on a stereo
broadcast, you can change from stereo to
mono sound so that you can hear the
broadcast more clearly and easily.
s: Stereo sound
v : mono sound
t : Bilingual I (sub I)
u : Bilingual II (sub II)
• The sound mode you can choose differs
depending on the TV programme.
• This function does not work in the EXT
modes.
BASS
You can adjust the low tone of the sound.
2 : weaker
3 : strong
TREBLE
You can adjust the high tone of the sound.
2 : weaker
3 : strong
BALANCE
You can adjust the volume balance between
the left and right speaker.
2 : turn the left speaker's volume level up.
3 : turn the right speaker's volume level up.
24
HYPER SOUND
OFF
You can enjoy sounds with a wider
ambience.
ON:
This function is turned on.
OFF:
This function is turned off. The menu
disappears.
• The HYPER SOUND function does not
work properly with mono sound.
• You can turn the HYPER SOUND
function on or off with a single press. For
details, see "HYPER SOUND function"
on page 15.
• Notes for Ireland model
(AV-32T5SR/AV-32T5BR/AV-28T5SR/
AV-28T5BR)
- The HYPER SOUND function works
only for the audio signal output from
TV channels. It cannot work for the
audio signal input from EXT sources.
- The HYPER SOUND function affects
the audio signal output from the EXT-1
and EXT-2 terminals. If you want to
output the normal audio signal from the
EXT terminals, turn the HYPER
SOUND function off.