Table of Contents
Advertisement
SMARTINTER@CTIVETVANDHOMENETWORK
Wirednetworksettings
There are two ways of making the wired network
settings.
A
Automatic wired network connection,
all connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) are ob-
tained from modem automatically.
B
Manual wired network connection,
all connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) must be
configured manually.
Automaticwirednetwork
connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. A Television con-
nected to the same network with a Modem or
IP sharer that support DHCP obtains the »DNS«
values that are required for »IP Address«, »Net-
mask«, »Gateway« and internet access auto-
matically, and thus you are not required to enter
those values manually.
1
Open the menu with »MENU«.
2
Select the line »INTER@CTIVE TV« with »
or »
« and press »OK« to confirm.
Λ
– The »INTER@CTIVE TV« menu appears.
INTER@CTIVE TV
inter@ctive Applications
Network Settings
Connection Type
Network Configuration
IP Address
DNS
Netmask
Gateway
MAC Address
Exit
Back
«
V
dd.mm.yyyy
hh:mm
OK
Wired
AUTO
10.134.151.15
10.134.150.8
255.255.255.0
10.134.151.254
E1:DF:BF:92:00:11
Connect
Test Connection
3
Select »Connection Type« with »
and then select »Wired« with »
4
Select »Network Configuration« with »
»
« and then select »AUTO« with »
Λ
5
Start the registration to the home network by
pressing »
« (red).
– The mesage »Connecting ... Please Wait«
appears.
6
Press »
« (green) to make sure that the
network connection is established with the
current settings.
– The messages »Testing ... Please Wait«
appears, after successfull announcement
the messages »Connecting To Gateway:
Success«
and
Success«.
7
Press »MENU« to end the setting.
Note:
If you do not have a dynamic network,
7
follow the instructions in manual connection
section.
« or »
V
Λ
<
>
« or »
«.
« or
V
<
>
« or »
»Internet
Connection:
2 3
ENGLISH
«
«.
Advertisement
Table of Contents
