Table of Contents
Advertisement
Web Interface
To access SNMPv1/v2c Communities settings through the Web interface:
• Click on the Configure tab, then Access or V1 Access (under Management Protocol) in the
left panel and finally Edit in the right panel. After making changes, click Save.
Configure
tab
V1 Access
NOTE
Avoid the following setting—it permits access by any host and may pose a security risk:
• Network Name = 0.0.0.0
• Access = write
• Community = public
Configure up to 20 devices for read/write access
22
Network Settings
Click on Edit
Hide quick links:
Advertisement
Table of Contents
