Release Mode; Choosing A Release Mode - Nikon D810 User Manual

Release Mode

Choosing a Release Mode

To choose a release mode, press the
release mode dial lock release and turn
the release mode dial to the desired
setting.
Mode
Single frame: Camera takes one photograph each time shutter-
S
release button is pressed.
Continuous low speed: While shutter-release button is held down,
camera takes photographs at frame rate selected for Custom
Setting d2 (CL mode shooting speed, 0 321). Lower built-in
T
flash (0 190); continuous release is not available while flash is
raised.
Continuous high speed: While shutter-release button is held down,
camera takes photographs at frame rate given on page 104.
U
Use for active subjects. Lower built-in flash (0 190);
continuous release is not available while flash is raised.
Quiet shutter-release: As for single frame, except that mirror does
not click back into place while shutter-release button is fully
pressed, allowing user to control timing of click made by
J
mirror, which is also quieter than in single frame mode. In
addition, beep does not sound regardless of setting selected
for Custom Setting d1 (Beep; 0 321).
Qc (quiet continuous) shutter-release: While shutter-release button
is held down, camera takes photographs at frame rate given
M
on page 104. Camera noise is reduced. Lower built-in flash
(0 190); continuous release is not available while flash is
raised.
102
Description