Advertisement
H a nn s p r e e 4 2 inch LCD Television Service Manual
• Remove the 6 screws from the HDMI jacks then remove the other 8 screws in
the component input area.
the VGA input jack. The plastic trim piece can now be removed exposing the 3 remaining
screws attaching the jack plate. Once the jack plate is removed the 6 screws attaching
the power supply can be removed.
Proprietary & Confidential
Edited by Foxit Reader
Copyright(C) by Foxit Software Company,2005-2007
For Evaluation Only.
A 3/16" nut driver is needed to remove the 2 screws in
(Figure 12)
Page 12
Advertisement
