JVC AV-27D800 User Manual page 20

2 G U I D E
0
STEP 3C
Next G U I D E Plus+ G O L D will send a test signal to your cable
box. The test will switch the channel in the PIP window to
channel 09.
1. G U I D E Plus+ G O L D will ask if the PIP display
switched to channel 09. If the channel has
changed to 09 use the up and down arrow keys to
select Yes and press E
NOT change to channel 09, use the arrow keys to
select No and press E
(
If you selected YES, you will automatically move to Step 3D. If you
selected NO, G U I D E Plus+ G O L D will repeat the test using a different code.
This step may be repeated several times until the proper code is found.)
2. If G U I D E Plus+ G O L D tests all available codes for a
particular cable box and fails to find the correct
one, a message will appear saying the test has
failed. You may try the test again using a different
manufacturer's name, or you can skip the cable
box set up. If you get a message that the cable
box test failed, please consult the manual that
came with your cable box or contact your cable
company for more information.
Note: Skipping cable box setup means GUIDE Plus+ GOLD will not be
able to automatically control your cable box.
STEP 3D
G U I D E Plus+ G O L D will ask you for the cable output channel.
This is the channel your television must be tuned to in order
for your cable box to work.
1. Use the up and down arrow keys on your remote to
select the channel number or input needed to
operate your cable box.
2. Press the E
(
After you press Enter you will automatically move to step 4.)
P L U S +
. If the PIP window DID
NTER
.
NTER
button to record your selection.
NTER
G O L D S E T U P