Channel Control Storing Channels - Samsung 850 series User Manual

Channel Control
Storing Channels
Antenna→Air/Cable
❑
Before your television can begin memorizing the available channels, you must specify
the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
T
Press the TOOLS button to display Tools menu.
You can also switch the air / cable by selecting Tools → Switch to Cable (or Air)
Auto Program
❑
•
Air : Air antenna signal.
•
Cable : Cable antenna signal.
•
Auto : Air and Cable antenna signals
N When selecting the Cable TV system: Selects the cable system.
Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal
source has been selected.
N After all the available channels are stored, it starts to remove scrambled channels.
The Auto program menu then reappears.
N If you want to stop Auto Programming, press the
The Stop Auto Program? message will be displayed. Select Yes by pressing the ◄ or ► button, then press the ENTERE
button.
Clearing Scrambled Channel (Digital channels only)
❑
The Clear Scrambled Channel function is used to ilter out scrambled channels after Auto Program is completed.
This process may take up to 20~30 minutes.
N
To stop searching scrambled channels: Press the
Press the ◄ button to select Yes, then press the ENTERE button.
N This function is only available in
Fine Tune (Analog channels only)
❑
If the reception is clear, you do not have to ine tune the channel, as this is done
automatically during the search and store operation. If the signal is weak or distorted,
you may have to ine tune the channel manually.
N
Fine tuned channels that have been saved are marked with an asterisk * on the
right-hand side of the channel number in the channel banner.
If you do not store the ine-tuned channel in memory, adjustments are not saved.
N
To reset the ine tuning setting, press the ▼ button to select
N
BN68-850_Eng.indb 21
STD, HRC and IRC identify various types of cable TV systems.
ENTERE button.
ENTERE button to select Stop.
Cable mode.
Reset, then press the ENTERE button.
English - 21
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Fine Tune
Air 7* Fine Tuned
Reset
UMove L Adjust
Save Return
2009-06-18
►
+5
3:55:19