Silent Control - Canon EOS 7D Mark II Instruction Manual

3

Silent Control

You can change the settings of the ISO speed, sound-recording level,
etc., without making too much noise while shooting a movie.
If [z5: Silent Control] is set to [Enable h], you cannot change Quick
Control settings with the <5> Quick Control dial during movie shooting.
Even if you change the aperture silently with <h>, the movie will still
record the lens aperture-driving sound.
If there is water or dirt on the <h>, the touch operation may not work. In
such a case, use a clean cloth to clean the <h>. If it still does not work,
wait a while and try again.
Before shooting a movie, you can use <h> with the [Rec. level] setting to
adjust the sound-recording level.
338
When [z5: Silent Control] (the [z3]
tab in <A>) is set to [Enable h], you
can use the touch pad <h> on the inner
ring of the Quick Control Dial.
You can just touch the top, bottom, left,
or right of <h> for silent operation.
During movie shooting, you can press
the <Q> button to display the Quick
Control screen and change the functions
below with <h>.
Settable
Functions
Shutter speed
Aperture
ISO speed
Exposure compensation
2
Recording level*
nVolume
*1: With Auto ISO set.
*2: With [Sound recording: Manual] set.
Shooting Mode
A d/F s f a
k
- -
k
- - -
- - -
k k k
-
k k k
-
k k k k
k
-
k
k
-
1
k*
k
k