Drive Mode - Sony XVM-862 Operating Instructions Manual

I
4
Precautions
To avoid the risk of serious injury or
accident, read the following
precautions before installing and
operating the unit.
On safety
Comply with your local traffic rules and
regulations.
• While driving, the driver must not
watch or operate the monitor. It may
lead to distraction and cause an
accident.
Park the car in a safe place when the
driver watch and operate the monitor.
Watching video pictures
DRIVE MODE
The video pictures appear only after
you park the car and set the par king
brake.
When the car starts moving, the
video pictures automatically
disappear after displaying the
following caution.
Do not operate equipment connected
to the monitor or watch the monitor
while driving.
The caution above appears only
when the monitor is installed on the
dashboard.
• After installing
- Take care not to bump your head
against the unit when getting up
from the back seat.
- Do not leave the monitor under
direct sunlight for a long period of
time.
On installation
• Installing this unit requires technical
expertise.
This unit should be installed by a
qualified technician or service
personnel.
• If you try to install this unit by
yourself, do it properly, referring to
the installation and wiring diagrams
in this operating manual. Improper
installation may result in fire or
electric shock.
• Before installation, be sure to turn the
ignition switch to the OFF position or
take the key out. Installing this unit
with the ignition on may cause battery
drain or a short circuit.
• Do not damage any pipes, tubes, the
fuel tank or electric wiring when
installing this unit. This can cause a
fire. If you drill a hole in car panels,
make sure that any hidden car parts
will not be damaged.
• Do not use any nuts or bolts for safety
devices such as steering linkage, fuel
supply or braking systems. This can
cause a fire or an accident.
• Take care to prevent cords and wires
from getting tangled or crimped in the
moving portion of a seat rail.