Operating The Copy Station; Load The Bins; Power On The System - Rimage Copy Station User Manual

Operating the Copy Station

This section provides the information needed to operate your system.
For details on loading and powering on the system, refer to the Rimage
Professional 3400 and 5400N User Guide found on the User Guide Disc that
shipped with your Professional 5400N system.

Load the Bins

Make sure that the autoloader bins have the proper discs in them: The
default bin configuration is optimal for Copy Station performance.
Bin 1 - CDs
Bin 2 - DVDs
Bin 3 - Blu-ray Discs
External Bin - Output/Reject
1. Open the autoloader door.
Tip: The system pauses any time the door is opened. Close the door to
resume the system operation.
2. Place up to 50 CDs in Bin 1.
3. Place up to 50 DVDs in Bin 2.
4. Place up to 50 BDs in Bin 3.
5. Close the autoloader door.

Power On the System

1. Press the power switch on the rear of the 5400N The system powers on,
including the integrated printer.
Power Switch
2001809_A
2. On the front of the 5400N, press the PC power button to power on the
The Copy Station is powered on.
For more information vist rimage.com/support
embedded PC.
PC Power Button
4