Sony DAV-HDX900W Operating Manual page 88

x [DISTANCE (SURROUND)]
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 22), the settings is automatically
displayed.
0.00 - 7.00 m
0 - 23 ft
Be sure to change the value in the Setup Display
when you move the speakers.
[L/R]
1)3)
3.00 m/10 ft
(appears when you
set [SURROUND] to
[YES] in the
[CONNECTION]
setting.)
1)
When you perform the Quick Setup (page 22), the
default settings are changed.
2)
0.00 to 7.01 meters for North American models.
3)
3.04 m/10 ft for North American models.
Note
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
• When the speaker distance setting is not in the
recommended range,
being the number).
recommended distance.
88
US
2)
/
Surround speaker distance
from the listening position can
be set from 0.00 to 7.00
2)
meters (0 to 23 ft).
/ ** m is displayed (**
indicates over the
indicates below.
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R] Set this between –6.0 dB and
0.0 dB
+6.0 dB.
[CENTER]
Set this between –6.0 dB and
0.0 dB
+6.0 dB.
(appears when you
set [CENTER] to
[YES] in the
[CONNECTION]
setting.)
[SUBWOOFER] Set this between –6.0 dB and
+2.0 dB
+6.0 dB.
x [LEVEL (SURROUND)]
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
[L/R] Set this between –6.0 dB and
0.0 dB
+6.0 dB.
(appears when you
set [SURROUND]
to [YES] in the
[CONNECTION]
setting.)
To adjust the volume of all the
speakers at one time
Turn the VOLUME control on the unit, or press
VOLUME +/– on the remote.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[OFF] The test tone is not emitted from the
speakers.
[ON]
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.