Delete Text; Cut, Copy, Paste, Undo; Check Spelling - Sharp PV300G Reference Manual

Use the control buttons and keyboard to navigate within a text box:
• Move character-by-character – Press the D-Pad or roll the trackball
left/right.
• Jump to beginning/end of a word – Press ALT + D-Pad or trackball
left/right.
• Jump to beginning/end of a line – Press MENU
• Jump to beginning/end of the text box – Press MENU

Delete Text

• Delete a character to the left of the cursor – Press DEL
• Delete a character to the right of the cursor – Press SHIFT + DEL
• Delete all the characters on one line – Press ALT +

Cut, Copy, Paste, Undo

To cut, copy, or paste text you have typed, do the following:
1. Position your text cursor next to the text you want to cut or copy. (Use
the navigation methods listed above to position the text cursor.)
2. Hold down the SHIFT key while pressing the D-Pad or trackball in a
direction. As you select text, it is shown highlighted. (To de-select all,
release the SHIFT key and roll the trackball.)
3. Press MENU
simply press and hold the trackball to open the Edit Text context menu.
Select the operation you want to perform on the selected text.
Note the standard shortcuts:
• Cut
• Copy
• Select All
4. Paste text that you have copied (or cut) into any text box in any
application. Position your cursor where you want to paste the text, then
use the Paste shortcut MENU
stores one set of copied or cut text at a time.
5. If you make a text edit and want to undo it, simply press
To redo an undo, press MENU

Check Spelling

You can run spell check on any text field.
and select Edit Text to open the Edit Text submenu, or
MENU + X
MENU + C
MENU + A
+ V. Note that the device clipboard only
+ SHIFT + Z again.
+ trackball left/right.
+ / .
MENU
24
+ Z.