Paper Feed and Exit
3.3 PAPER FEED AND EXIT
3.3.1 KNOCK UP PLATE UNIT
1.
Before you remove the knock up plate unit, you should remove:
By-pass tray (
2.
Remove knock up plate unit [A] in the direction of arrow, as shown.
For convenience of assembly, do not separate spring [B] from by-pass pick up rack
[C]. Also for more convenient assembly, locate hook section of spring that is
connected to knock-up plate unit as shown on the outside.
3.3.2 EXIT ROLLER
1.
Before you remove the exit roller, remove the top cover (
G186
"By-pass Tray")
3-12
"Top Cover")
SM