Viewing Teletext Programmes - JVC AV-2108TEE, AV-2508TEE, AV-2908TEE, AV-3408TEE Instructions Manual

Viewing teletext programmes

PICTURE MODE
CHANNEL SCAN RETURN
TV/TEXT ECO SENSOR
TV/TEXT
REVEAL HOLD
REVEAL
HOLD
MODE SIZE
MODE
SIZE
I Basic operation
1 Select a TV channel with a teletext
programme.
2 Press the TV/TEXT button to change
the TV mode to the teletext mode.
The mode cycles as follows.
TEXT mode (TEXT only)
TV mode
MIX mode (TV and TEXT)
3 Select a teletext page by pressing
the CHANNEL M button,
Number buttons or coloured
buttons.
To return to the TV mode, press the TV/
VIDEO button or the TV/TEXT button.
• If you have trouble receiving teletext broad-
casts, consult your local dealer or the tele-
text station.
• If characters on a teletext programme do not
appear properly, change the TELETEXT LAN-
GUAGE setting. For detailes, see "TELETEXT
LANGUAGE" on page 18.
10
4 5 6
7 8 9
0
-/--
OFF TIMER
Coloured
TEXT
buttons
INDEX STORE
STORE
INDEX
SUBPAGE CANCEL
CANCEL
SUBPAGE
Using the List Mode
You can store the numbers of your favourite
teletext pages in the List mode and call them
up quickly using the coloured buttons.
To store the page numbers:
1 Press the MODE button to engage
the List mode.
The stored page numbers are displayed
at the bottom of the screen.
2 Press a coloured button to select a
position. Then press the Number
buttons to enter the page number.
3 Press and hold down the STORE
button.
The four page numbers blink white to
indicate that they are stored in memory.
To call up a stored page:
1 Press the MODE button to engage
the List mode.
2 Press a coloured button to which a
page has been assigned.
To exit the List mode, press the MODE
button again.