Samsung LN19A330J1D User Manual page 75

Installing the Wall Mount Kit
This installation is to be used when attaching the wall mount bracket to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
Components
Please use provided components to install the Wall Mount Kit.
Bracket Anchors: 3EA
Screws: 3EA
OJ
Installation Guide
1
IW
to attach the Wall Mount Bracket to the wall
e
Mark the location of the 3 holes on the wall using the installation guide.
o
Drill 35mm-depth-holes on the marked locations using a 5.D-diameter drill.
Note: Drill a hole into a concrete wall using a hammer drill so that the depth of
the hole is equal to the length of the plastic anchor. When drilling the
hole, use a drill bit whose diameter is the same as that of the plastic
anchor. If the diameter of the bit is smaller than the anchor, the anchor
will not enter into the hole easily. If the diameter of the bit is bigger than
the anchor, the anchor will easily come loose from the hole.
o
Insert the plastic anchor into the drilled hole.
e
Place the wall mount on the wall and drive the screw through the wall mount.
o
Tighten the screw until it fits into the plastic anchor.
Note: If the bracket is not firmly fixed to the wall, the LCD TV may fall.
I
TP
EJ-
8;-
Et-=
0
(1 )
(2) (3) (4)
(5)
2 You must adjust the angle of the LCD TV's stand as in Figure (3) to make it ready to be mounted to
the wall bracket.
e
Place the front of the TV onto a soft cloth or cushion on a table as in Figure (1) .
- Align the TV bottom along the table edge.
o
Press on the center of the TV back.
Adjust the stand as in Figure (2) while pressing the button on the back of the stand.
Note: When you adjust the stand, press the button on the back of the stand.
(1 )
(2) Push button
(3)