Remaining Recording Time/Battery Power - JVC Everio GS-TD1BEK Detailed User Manual

Recording
5
After making sure that everyone is facing the camera, press the
SNAPSHOT button.
Frames appear around the faces of the subjects.
0
Pressing the SNAPSHOT button again starts the 10-second self-
0
timer.
6
The photographer enters the frame.
The frames around the faces disappear when the photographer is
0
detected, and a countdown timer appears.
The shutter is released three seconds after the photographer enters
0
the frame.
To stop the self-timer, press the SNAPSHOT button again.
0
Memo :
The "FACE DETECTION" function may fail to detect faces depending on
0
the shooting environment.
50
Photographer

Remaining Recording Time/Battery Power

You can check the remaining video recording time on the built-in memory
and SD card as well as the remaining battery power.
1
Open the LCD monitor and select the video or still image mode.
The video A or still image B icon appears.
0
2
Press the INFO button.
If in the still image mode, go directly to step 4.
0
3
Display the remaining recording time.
MAX RECORDING TIME
0h46m 0h46m
The remaining recording time is displayed only in the video recording
0
mode.
Press the INFO button to check the remaining recording time of each
0
recording media.
To display the remaining battery power, tap l.
0
Tap J to return to the recording mode.
0
To exit the display, tap L.
0
4
Display the remaining battery power.
REMAINING BATTERY
For video recording, tap J to return to the remaining recording time
0
display. For still image recording, tap to return to the recording mode.
To exit the display, press the INFO button or tap L.
0
Remaining battery power will not be displayed when the AC adapter
0
is connected.
Memo :
You can change to the desired video quality by tapping on it from the
0
remaining recording time display.
BUILT-IN MEMORY
FREE
USED
MAX TIME
min