Changing The Decor Panel; Winter Operation - Dometic RM 5310 Operating Instructions Manual

Refrigerator operation

4.12 Changing the decor panel

Remove the door, see " 4.11 Changing the
doorhang ".
1
Fig. 39
3
Fig. 41
Loosen three screws of the lower moulding
and remove trim moulding.
Withdraw the decor panel by sliding it
downwards . Fit new panel and slide it
upwards as far as possible.
Fit the trim moulding back in place.
Fit the door on the hinge pin.
Decor panel dimensions :
Model RM 5310
Height Width
532 +/-1 mm 453 +/-1 mm
Model RM 5330
Height Width
740 mm 453,5 mm
Model RM 5380
Height Width
740 mm 453,5 mm
2
Fig 40
4
Fig. 42
Thickness
max. 3,8 mm
Thickness
max. 3,8 mm
Thickness
max. 3,8 mm

4.13 Winter operation

In Winter, check regularly that the ventilation
grilles and the exhaust duct system (1) have
not been blocked by snow, leaves, etc.
When the outside temperature falls below
+10°C, the winter cover (2) should be fitted.
This protects the unit from excessively cold air
which could have adverse effects on the per-
formance of the unit.
You should also attach the winter cover if the
vehicle is taken out of service for a longer
period of time or while it is being cleaned from
the outside.
18
1
Fig. 43
2
Fig. 44