Getting Started - Zte Flame Z667G User Manual

Mobile phone
Hide thumbs Also See for Flame Z667G:
Table of Contents

Advertisement

Table of Contents
Upgrading the Phone Software .................... 69
Troubleshooting ............................................. 70
For Your Safety ............................................... 73
General Safety .................................................... 73
Radio Frequency (RF) Energy ............................... 74
FCC Compliance ................................................. 74
for Mobile Phones .............................................. 75
Distraction ......................................................... 76
Product Handling ............................................... 76
Electrical Safety .................................................. 78
CTIA Requirements ............................................. 78
Radio Frequency Interference .............................. 79
Explosive Environments ...................................... 80
Specifications ................................................. 81
Notes ............................................................... 82
4

Getting Started

Installing the Battery and a
microSDHC Card
Switch off your phone before installing or replacing the
battery. You have the option to install a microSDHC
card of up to 32GB to expand your phone's storage
capacity. The microSDHC card can be installed and
removed while the phone is turned on. Unmount the
microSDHC card before removing it.
1. Place your finger in the slot at the bottom of the
back cover to lift and remove the cover.
2. Insert the battery by aligning the metal contacts on
the battery with the gold contacts in the battery
compartment. Gently push down on the battery until
it clicks into place.
WARNING!
Do not handle a damaged or leaking
Li-Ion battery as you can be burned.
3. Open the microSDHC card slot.
4. Hold your microSDHC card with the metal contacts
facing down and slide it into the microSDHC card slot.
NOTE:
Some applications may not function
normally after you remove the card, pre-installed or
otherwise.
5. Close the microSDHC card slot. Press the back cover
gently back into place until you hear a click.
5

Advertisement

Table of Contents
loading

Table of Contents