Advertisement
genesys audio system assembling instructions
Assembly Satellite Speaker
1. Place the hanger and
tube gently on a level, stable
surface.(on a carpet,etc.)To
consist the hole of hanger
with stand tube s and lock
them by screw driver
5. To screw on adjustment tube with stand tube 6. To pull speaker cables out through base 7. To screw on adjustment tube with base 8. To adjust stand height as per requirement.
Connections
Be sure to turn OFF your amplifier before connecting or disconnecting the speakers
Optimized settings for the Genesys series
�
1. Twist wires conductor
3. Insert the conductor
The speaker system maximum input is indicated in the specifications. Please to avoid speaker damage, never run the
speakers at power levels exceeding this limit.
2.To lock stand and
speaker by screw driver.
Connect your Genesys PRO or Genesys xp to the
audio system using the RIGHT M/LEFT M audio OUT
����� ���
��
�
���
���
���
���
����
����
�
�����
�������
2. Push
4. Release
3. Speaker cable pass through
stand tube
����� ��
����� ���
������
�������
���� ���
���� � �
��� � �
��� �
��� �
�������
������
������
Connection cable T
�
�
���
�
���
�
���
���
����
����
��� ������
�������
�����
������
�
�
�
�
�
�
������
���� �� � �����
��
4. Speaker cable continue to pass
through adjustment tube
����
��������
���� �
���� �
���
���� �
��� �
�� �
���� �
��������
����
Connect to a 230V/50Hz
power AC
�����
��
��� �
�� �
3
Advertisement
