Connecting To An External Amplifier - JVC AV 27530 User Manual

Quick Setup
Notes:
• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors. Please consult the user's manual for your DVD player for more information.
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or audio output) before starting the other to avoid accidentally
switching the cables.
• Progressive DVD players (players with an output scan of 31.5 KHz) will not work properly with
this television. Set your DVD player's output to "interlaced", or non-progressive mode.
• If you use INPUT 2 (Component-In), for a DVD connection, you must select
"V2-COMPONENT" by pressing the I
Diagram #3
Illustration of AV-27530

Connecting to an External Amplifier

TV Rear Panel
1) Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to
the LEFT AUDIO INPUT on the amplifier.
2) Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to
the RIGHT AUDIO INPUT on the amplifier.
Notes:
• Refer to your amplifier's manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
button, for proper display of the DVD signal.
NPUT
VCR
R L V
IN
IN
OUT
OUT
OR
Connections
Cable or Antenna
Output
Coaxial Cable
TV Rear Panel
DVD Player (OPTIONAL)
Green Y
P
Blue
B
P
Red
R
OUT
Speaker
Amplifier
AUDIO OUT
L R
Illustration of AV-27530
Speaker
13