HSAAP_Regulatory.fm
Regulatory information
AP2630 Internal Antenna AP, AP2640 External Antenna AP
2.1.3.2
Optional 3rd Party External Antennas
The AP2640 Standalone Access Point can also be used with optional certified 3rd party
antennas. However, in order to comply with the local laws and regulations, an approval may be
required by the local regulatory authorities. The following optional antennas have been tested
and approved for use with the External Antenna model.
When using an approved 3rd party external antenna (other than the default), the
>
●
power must be adjusted according to these tables.
This device must be professionally installed. The following are the requirements
●
of professional installation:
Equipment marketing
The device cannot be sold retail to the general public or by mail order. It must be
●
sold to dealers.
Professional installation:
Installation must be controlled.
●
Installed by licensed professionals (equipment sold to dealers who hire
●
installers)
Installation requires special training (special programming and antenna and
●
cable installations)
Application
The intended use is generally not for the general public. Instead, it is generally
●
for industry/commercial use.
28
HiPath Wireless Standalone Access Point V1.0, Getting Started Guide
A31003-W1110-U101-1-7619, February 2007