Setting The Alarm Time - Silvercrest SWEP 500 A1 Operating Instructions Manual

Setting the alarm time

You can set two alarm times in your world receiver.
Alarm function
Radio
Acoustic signals
Switched off
• With the radio switched off, press the buttons
The screen shows the most recently set alarm time and the symbol for
the alarm type.
UP
• Press the
at minute intervals. Hold down one of the buttons for a few seconds to
move the setting forward or backward quickly at 10 minute intervals.
Vol.+/AL–1
• Press the
(see table above) is indicated on the screen.
SNOOZE
• Press the
alarm to sound:
You can select between workdays (Mo, Tu, We, Th, Fr), weekends (Su, Sa),
the whole week (Su, Mo, Tu, We, Th, Fr, Sa) or a single weekday.
The selected setting is shown on the display.
SNOOZE
• Press the
SNOOZE
the button until the screen shows an individual week day.
SNOOZE
• Press the
To go back to selecting week days, weekend or every day, briefly hold
SNOOZE
down the
MODE
• Press the
The setting is also saved if you wait around 15 seconds until the
screen returns to displaying the time.
Symbol on the screen
No symbol
DOWN
or button to move the alarm time forward or backward
Vol.–/AL–2
(or
button to set the weekday on which you want the
button until the desired alarm days are set. Hold down
button to set the desired week day.
button again.
button to save the setting and return to the time mode.
Vol.+/AL–1
) button until the desired alarm function
- 19 -
GB/CY
Vol.-/AL–2
(or ).