Installing the Software
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
8.
Click [Finish].
• The installation is complete.
Installing the AV/C Camera Storage Subunit-WIA Driver
Installation Precautions:
¡ Install the driver files from the DV NETWORK SOLUTION DISK first before installing
the driver (
10).
¡ Close any programs that are running before installing the driver.
¡ Do not turn off the camcorder until the driver installation is complete. And do not
interrupt the installation.
¡ Users of Windows XP Professional must first log in as an Administrator to install
programs.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
1.
Start the computer.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
2.
Connect the power adapter to the camcorder.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
3.
Set the camcorder to CARD PLAY (VCR) mode.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
4.
Connect the camcorder to the computer using the DV cable
(
22).
• The driver installation starts automatically.
• Depending on the setting of your computer, a video editing program may
start. In such case, close this program.
• If the installation is complete, the [Scanner and Camera Wizard] or a dialog
for selecting an application appears. Click [Cancel] to close the dialog.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
5.
Restart the computer.
12