Setting Up Your Tv; Connecting The Aerial - JVC 0405TKH-CR-MU Instruction Manual

Setting up your TV

Connecting the aerial

• The connecting cables are not provided.
• For further details, refer to the manuals provided with the devices to be connected.
Caution
• Turn off all the equipment including the TV before connecting anything.
If you connect via a device with an
antenna terminal such as a VCR,
follow A → B → C in the diagram
opposite.
If you connect the antenna
directly to the TV, follow 1.
• To connect more equipment, please see
"Connecting the external devices" on
page 53.
• To connect additional audio equipment,
see "Connecting Speakers/Amplifier" on
page 55.
• When receiving Digital terrestrial
broadcasting (DVB-T), reception can
suddenly be lost if the signal becomes
weak. Use a correctly installed high-
performance antenna.
• When connecting via a device with an
antenna terminal such as a VCR, depending
on the connection method, the signal may
be weakened. If this happens, use a booster
to increase the signal strength.
• In areas with a lot of radio communication
such as near ports or airports, noise may
be introduced into the picture or sound. In
such cases, reception may be improved by
using a high-performance antenna.
• Read the instruction manual of the
devices which you connect to the TV.
6
Back of the TV
SERVICE
1
EXT-
2
EXT-
21-pin
SCART
Cable
VCR
AV IN/OUT
Terminal
CAM (CI) slot
SERVICE
Aerial
75-ohm
Coaxial
Cable
L
R
AUDIO OUT
75-ohm
Coaxial
Cable
To Aerial
Input
To Aerial
Output
Not available
(For service
adjustments)