Table of Contents
Advertisement
Main menu
You can define the initial setup of the HDD operation from the HDD
Setup menu or change the settings of other items to suit your prefer-
ences.
To launch the HDD Setup menu press the HDD Menu button on the
remote control.
The HDD menu window will appear press the e or d on the remote
control to move the highlighted bar to the desired item. Press the 8
button on the remote to activate the currently selected menu item. To
confirm the selection press the OK button.
HDD Setup
Set Time
Format HDD
Scandisk HDD
Timer Record
Record Quality
Always Replay
Move
Exit
HDD MENU
Set Time
Enter the HDD Setup Menu and select set time by using the e or d
buttons. Set Time has two options Automatic and Manual time
adjust. Select the options by using the e or d buttons and then the
OK button.
● Automatic time will adjust the time automatically via the
antenna . This will show the progress of gathering the Date, once
found the date and Time will be displayed. If the time data is not
available a message will appear on the screen and time will have to
be entered in manually.
Set Time
Antenna is not available
OK
● Manual time
To select manual press e or d buttons until it
becomes highlighted press the OK button. A message
will appear
Set Time
Summer Time?
On
Summer time can be turned on or off by using the
7or 8 buttons and the OK button.
To adjust the time use the numeric (0-9) buttons on the remote or by
using the e or d buttons. To move to the next position use the 7
or 8 buttons. To save or cancel the options select the SAVE/ Cancel
on the menu by using the 7or 8 buttons.
HDD Setup
Set Time
Enter
Move
OK
22
HDD OPERATION
Automatic
Manual
Automatic
Manual
Automatic
Manual
Off
Automatic
Manual
D / M / Y
h : m
01 / 11 / 06 / 16 : 30
Save
Cancel
Exit
HDD MENU
Format HDD
Formating the Hard disk all the information stored will be deleted.
HDD Setup
Format HDD
Move
[OK] Enter
Select the HDD Menu buttonto open Hdd Setup. Press the e or d
buttons to select Format and the 8 button to highlight START. Press
OK button.
To confirm Format select yes or no using the 7 or 8 buttons and
then the OK button, the following display will appear.
HDD Setup
Format HDD
All Erase HDD?
Yes
Move
Enter
OK
When formating is in progess do not power off the set.
HDD Setup
Format HDD
Move
[OK] Enter
Scandisk HDD
The scandisk function will scan the disc and check for any errors
Select Scan disk by using the e or d buttons. Select Start and a
confirmation message will appear. Select Yes or no using the 7 or 8
buttons on the remote and then the OK button.
HDD Setup
Scan Disk HDD
Scandisk HDD?
Yes
Move
OK
Once scaning starts the following screen appears, do not Power off
the set
HDD Setup
Scan Disk HDD
[OK] Enter
Move
Start
[HDD Menu]
Exit
Start
No
Exit
HDD MENU
Start
Donʼt power off
While resetting
Cancel
[HDD Menu]
Exit
Start
No
Enter
Exit
HDD MENU
Start
Scandisk HDD
Donʼt power off
Cancel
[HDD Menu]
Exit
Advertisement
Table of Contents
