Service The Parksense® Rear Park Assist System; Cleaning The Parksense® System - Dodge Charger 2013 Owner's Manual

Hide thumbs Also See for Charger 2013:
Table of Contents

Advertisement

276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Service The ParkSense® Rear Park Assist
System
When the ParkSense® Rear Park Assist system is mal-
functioning, the Electronic Vehicle Information Center
(EVIC) will actuate a single chime, once per ignition
cycle, and it will display the "CLEAN PARK ASSIST",
"SERVICE PARK ASSIST" or the "SERVICE PARK AS-
SIST SYSTEM" message. Refer to "Electronic Vehicle
Information Center (EVIC)" in "Understanding Your
Instrument Panel" for further information. When the
shift lever is moved to REVERSE and the system has
detected a fault condition, the EVIC will display the
"PARK ASSIST SYSTEM OFF" message for as long as the
vehicle is in REVERSE. Under this condition, ParkSense®
will not operate.
If "CLEAN PARK ASSIST" appears in the Electronic
Vehicle Information Center (EVIC) make sure the outer
surface and the underside of the rear fascia/bumper is
clean and clear of snow, ice, mud, dirt or other obstruc-
tion and then cycle the ignition. If the message continues
to appear see an authorized dealer.
If "SERVICE PARK ASSIST" or "SERVICE PARK ASSIST
SYSTEM" appears in the EVIC, see an authorized dealer.
Cleaning The ParkSense® System
Clean the ParkSense® sensors with water, car wash soap
and a soft cloth. Do not use rough or hard cloths. Do not
scratch or poke the sensors. Otherwise, you could dam-
age the sensors.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dodge charger 2013

Table of Contents