To Remove The Hard Drive - HP OmniBook 5500 User Manual

7. Replace the slot cover.
8. Insert the battery, then press the blue ON/OFF button.
9. When you see the following message:
WARNING - UNEXPECTED AMOUNT OF MEMORY - RUN SCU
press F2 to go to the System Configuration Utility.
10. Press ALT+X to open the SCU Exit menu.
11. Click Save and Exit to update the system configuration.

To remove the hard drive

1. Important
Back up all the files on your current drive C. You can back up the files to a tape
drive, a network drive, a PC card, or a flexible disk.
2. Unplug the adapter.
3. Exit Windows.
•
If you're using Windows 95, use the shutdown option from the Start menu.
•
If you're using Windows for Workgroups, exit Windows, then press
CTRL+ALT+blue On/Off button simultaneously.
4. Remove all batteries from the OmniBook.
5. Close the cover and turn your computer over.
6. Remove the screw and security cover located at the back end of the hard disk
drive.
7. Firmly slide the drive out of the drive compartment. (This requires some force.)
30