Digital-In; Digital-In Audio - JVC HD-ILA HD-52G587 User Manual

Onscreen Menus

Digital-In

The DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480p
picture signal is being input to the DIGITAL-IN terminal. This option adjusts the position when
an HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, the
position can be adjusted by selecting either SIZE1 or SIZE2.
Press the M
To DIGITAL-IN
π †
è
To enter
To select AUTO, SIZE1 or SIZE2
π †
Press the M
Notes:
• The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal is
input to the Digital-In terminal and the picture is being displayed on the screen.
• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, the
televison will select "SIZE1" or "SIZE2" automatically.

Digital-in Audio

This feature is used if you have a DTV or HDMI compatible component connected to your
monitor.
Press the M
To DIGITAL-IN AUDIO
π †
è
To select ANALOG, DIGITAL or AUTO
Press the Menu button when fi nished
Notes:
• If you connect the HDMI device to the HDMI 1, choose
DIGITAL. If you connect the DVI device to the HDMI 1, choose ANALOG.
• Refer to your DTV or HDMI component's instruction manual for more information.
• When you select AUTO, the monitor will select "ANALOG" or "DIGITAL" automatically,
depending on the audio input from the HDMI.
44
button
ENU
button to finish
ENU
button
ENU
INITIAL SETUP
PREVIOUS
DIGITAL-IN
DIGITAL-IN AUDIO
NEXT PAGE
SELECT OPERATE
INITIAL SETUP
PREVIOUS
DIGITAL-IN
DIGITAL-IN AUDIO
NEXT PAGE
SELECT OPERATE
SIZE1
DIGITAL
(1/4)
EXIT
MENU
SIZE1
DIGITAL
(1/4)
EXIT
MENU