Yamaha Disklavier E3 Update Manual page 7

■ Starting Video Synchronized Recording
1
Select a destination medium and album.
2
Press [RECORD].
The video synchronized recording standby screen appears, and
[RECORD] on the control unit lights red, and [PLAY/PAUSE] flashed in
green.
=Record=(SYNC) SO
A01-005
<00:00>
3
Set the camcorder to video shooting mode.
4
Select the video input on the DVD recorder which the
camcorder is connected to, then start recording on the DVD
recorder.
5
Press [PLAY].
[PLAY/PAUSE] stops flashing, and the counter starts to advance.
=Record=(SYNC) SO
A01-005
<00:00>
6
Wait for approximately ten seconds, and then start playing
your song.
7
Press [STOP] when you finish playing your song.
8
Stop recording on the DVD recorder.

Continued to next page
LR 99%
(New Song)
LR 99%
(New Song)

To select a medium and album, see
Chapter 3 "Basic Song Playback –
Selecting Medium and Their Contents"
on operation manual.
Note:
This step is necessary for
synchronization of the song and the
video playback, and should not be
omitted.
7