Pioneer VSX-RS320-k Operating Instructions Manual page 11

Controls and displays
STEREO/A.L.C.
Switches between stereo playback, Auto
level control stereo mode (page 26) and
Front Stage Surround Advance modes
(page 26).
STANDARD
Press for Standard decoding and to switch
between 2 Pro Logic II options (page 25).
ADV SURR
Switches between the various surround
modes (page 26).
8 System Setup and component control
buttons
The following button controls can be accessed
after you have selected the corresponding
input function button (BD DVD, TV, etc.).
Press RECEIVER first to access:
AUDIO PARAMETER
Use to access the Audio options (page 29).
SETUP
Press to access the System Setup menu
(page 32).
RETURN
Confirm and exit the current menu screen.
Press BD DVD or DVR first to access:
TOP MENU
Displays the disc 'top' menu of a DVD.
HOME MENU
Displays the HOME MENU screen.
RETURN
Confirm and exit the current menu screen.
MENU
Displays the disc menu of a DVD.
Press TUNER first to access:
TUNER EDIT
Memorizes/names stations for recall
(page 37, 38).
Note
1 The tone controls are disabled when the listening mode is set to DIRECT or PURE DIRECT.
BAND
Switches between AM, FM ST (stereo) and
FM MONO radio bands (page 37).
 (TUNE /, PRESET /),
9
ENTER
Use the arrow buttons when setting up your
surround sound system (page 32). Also used to
control BD/DVD menus/options.
Use the TUNE / buttons can be used to
find radio frequencies (page 37) and the
PRESET / buttons can be used to select
preset radio stations (page 38).
10 Component control buttons

The main buttons ( ,
control a component after you have selected it
using the input function buttons.
The controls above these buttons can be
accessed after you have selected the
corresponding input function button (for
example BD DVD, DVR or TV). These buttons
also function as described below.
RECEIVER
Press first to access:
BASS –/+
Use to adjust Bass
TRE –/+
Use to adjust Treble
Press TV first to access:
DTV/TV
Switches between the DTV and analog TV
input modes for Pioneer TVs.
11 Number buttons and other component
controls
Use the number buttons to directly select the
tracks on a CD, DVD, etc. There are other
buttons that can be accessed after the
RECEIVER button is pressed. (For example
TEST TONE, etc.)

, etc.) are used to
1
1
02
11
En