Electrolux EDC 46130 W User Manual page 9

125983730 gb.qxp 2006-10-03
Drying, Cooling and End/Anticrease
come on.
At the end of the programme the
selector dial must be turned to
position O, to switch the machine off.
Attention!
If you turn the programme selector dial
to another programme when the
machine is working, the lights of the
programme progress display start to
flash. The machine will not perform the
new selected programme.
Programme Option buttons
Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before depressing the
Start/Pause button.
When these buttons are pressed, the
corresponding pilot lights come on.
When they are pressed again, the pilot
lights go out.
Select Delicate
Pressing this button allows drying to be
performed at a lower temperature, for
delicate items.
The corresponding pilot light comes
on. This option can also be used for
time controlled drying.
DELICATE is only suitable for use with
loads of up to 3kg!
When the programme has finished the
pilot lights End is on.
17:46 Page 9
Select the Textile
Press the Textile button repeatedly, to
select the desired option. The relevant
light will light up.
You can select 2 different options:
Cotton Cycle: to be used for cotton,
where as in the programmes
When the programme has finished the
pilot lights End is on.
Easy Care: to be used for synthetic
or delicate items.
When the programme has finished the
pilot lights End is on.
Select the Start/Pause
Press this button to start the dryer after
having selected the programme and
the options.
The relevant light will stop flashing.
If the programme selector dial is turned
to another position, when the machine is
running, the buzzer will sound and the
programme phase indicator lights will flash.
electrolux use 9
GB