Epson EX7200 User Manual page 34

note
To rotate a displayed image,
press the u or d button on
the remote control until it is
displayed correctly.
note
To display a slideshow from
a folder that is not open,
highlight the folder and press
the Esc button on the
remote control. Then select
Slideshow from the menu
that appears and press
Enter .
To begin a slideshow from a
particular image, use the
arrow buttons to highlight
Enter
that image, press ,
then press Enter again.
64 Presenting With the Remote Control
2. If you are connected to another image source, press the
button on the remote control to go to the Slideshow program.
If you are not connected to another image source, the Slideshow
program appears automatically.
If necessary, press the arrow buttons on the remote control to
highlight the device you want to present from, then press the
Enter button.
3. If you need to select a subfolder on your device, press the arrow
buttons to highlight the folder and press
4. To display an individual image, press the arrow buttons to
highlight it and press
press the l or r arrow button.
5. To display a slideshow of all the images in the current folder, use
the arrow buttons to highlight
Slideshow screen and press
one time through. At the end, you see the folder display again.
Select the following as necessary to control your display or slideshow:
To move back up a folder level, highlight
I
of the Slideshow screen and press
To select a different device, highlight
I
right corner of the screen, press
Enter
Enter . To display additional image files,
Slideshow
on the bottom of the
Enter . The images display sequentially
Back to Top
Enter .
Select drive
Enter , and select the device.
USB
.
at the top
in the upper