Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Nautiques 2014 Ski 200 - OB

  • Page 3 Nautique. By purchasing a Nautique, you have taken the first step in trading your old lifestyle for a new one. Now that you own a Nautique, life as you know it will never be the same. Enjoy the Nautique Life.
  • Page 4: Record Important Information

    Record Important Information In addition to this manual, your Nautique boat is supplied with component manufacturer information such as instructions, warranties or other important information. Read these materials carefully since improper operation and maintenance can void the warranty and jeopardize personal safety.
  • Page 5: Boater's Checklist

    Boater’s Checklist For improved safety and enjoyment, check each of these items: Check Before You Launch Your Boat: • Read both the engine and the boat operator manuals. • Drain plug (Securely in place?) • Propeller Condition (Prop nut tight and secured, no cracked or bent blades, prop turns freely?) •...
  • Page 6: Restricted Areas

    California Health & Safety Code 25249.5-.13 KC-0206-B Emission Control Warranty Information The engine in your Nautique boat meets the strict requirements set forth by the California Air Resources Board (CARB). The engine has a special environmental tag and the boat has this label affixed to it.
  • Page 7: Boating Terminology

    Boating Terminology LENGTH OVERALL (LOA) PORT SIDE STARBOARD SIDE HELM TRANSOM FORWARD GUNWALE STERN FREEBOARD DRAFT WATERLINE CORC001 * An easy way to remember PORT side from STARBOARD side is “PORT” and “LEFT” both have four letters. Product Improvement Because of our policy of continuous product improvement, the illustrations used in this manual may not look the same as on your boat and are intended only as representative reference views.
  • Page 8: Table Of Contents

    Table of Contents Welcome........i Safety and Required Record Important Equipment ......1-15 Information.......ii Navigation Lights .....1-16 Boater’s Checklist ....iii Emergency Safety Restricted Areas .......iv Lanyard ......1-16 Proposition 65 ......iv Personal Flotation Emission Control Warranty Devices.......1-17 Information ......iv Fire Extinguisher....1-20 Boating Terminology....v Horn or Whistle ....1-20 Product Improvement....v Bilge Pump(s)....1-20...
  • Page 9 Nautique LINC 2.0 ....3-22 Specifications ......2-1 Product Information..3-22 200-OB, 200-CB ....2-1 Basic Navigation 200-V........2-1 Features ......3-23 200 Nautique Dash Pod and Quick Access Key Console........2-3 Features ......3-24 200-OB, 200-CB Team Dash Nautique LINC 2.0 – River Pod and Console ....2-5 Mode........3-44...
  • Page 10 Getting Underway ....5-1 Engine Cooling Water Safety Checklist ......5-1 Intake Valve.......3-73 Safety Equipment ....5-2 Battery Disconnect Fueling........5-2 Switch ........3-74 Gasoline Containing Nautique Electrical Alcohol ........5-3 System........3-74 When Fueling .....5-4 Fuel Tank ......3-75 After Fueling.......5-5 Optional Equipment ...3-76 Boarding.........5-5 Stereo and Speaker Boat Planing......5-5...
  • Page 11 Towing Your Boat ....9-8 Optional .........7-9 Long Trips......9-9 Proper Use of Freshwater Glossary ......G-1 Flushing Kit......7-9 Coastal Edition.....7-10 Warranty......W-1 Battery Maintenance ...7-11 NAUTIQUE LIMITED Battery Cable Warning WARRANTY ......W-1 Alarm.........7-13 Lifetime Limited Gelcoat Maintenance ..7-14 Warranty......W-1 Care of Metal .......7-15 Transferable Lifetime Care of Glass ......7-16...
  • Page 12 Engine/Power Train..W-2 Exceptions ......W-2 Procedure ......W-4 NAUTIQUE COASTAL EDITION LIMITED WARRANTY ......W-5 Lifetime Limited Warranty......W-5 Transferable Lifetime Limited Warranty ....W-5 Boat Three (3) Year Transferable Limited Warranty......W-6 Gel Coat One (1) Year Non-transferable Limited Warranty......W-6 Engine/Power Train Warranty......W-6 Exceptions ......W-6...
  • Page 13: Boating Safety

    Boating Safety Introduction Congratulations on your purchase of a new high-performance recreational tow boat. Your Nautique boat has been constructed to meet and/or exceed all U.S. Coast Guard (USCG) and National Marine Manufacturers Association (NMMA) requirements applicable at the time of its manufacture. However, it is still your responsibility as the boat owner to ensure the boat is operated in a safe manner and is properly maintained.
  • Page 14: About This Owner's Manual

    Section 1 About this Owner’s Manual The recommended practices and warnings in this manual represent sound advice for recreational boating and identify common risks encountered by boaters engaging in towed watersport activities. Read and understand the contents of this manual. Ask questions of a boating professional if anything in this manual does not make sense to you.
  • Page 15: Signal Words And Symbols Used In This Manual

    Boating Safety Signal Words and Symbols Used In This Manual Throughout this manual specific precautions and symbols identify safety-related information. You will find DANGER, CAUTION, WARNING and NOTICE symbols which require special attention. Please read them carefully and follow these precautions as indicated! They will explain how to avoid hazards that may endanger you, your passengers, towed participants, and other boaters.
  • Page 16: Basic Safety Rules

    Section 1 Basic Safety Rules Make sure you understand all of the operating instructions prior to attempting to operate this boat. Boating-related accidents are generally caused by the operator’s failure to follow basic safety rules or written precautions. Most accidents can be avoided if the operator is completely familiar with the boat and its operation, follows recommended practices, and is able to recognize and avoid potentially hazardous situations.
  • Page 17 Boating Safety • Check bilge pump, horn, lights, blower and other equipment to verify they are operating properly. • Verify that the emergency cutoff switch lanyard is in proper operating condition and is properly affixed to the driver. • Check the operation of the steering system. Verify that the steering is operational before launching the boat.
  • Page 18: Precautions While Underway

    Section 1 - If you see liquid gasoline in the engine compartments/bilge or smell gasoline vapors, DO NOT attempt to start the engine. Liquid gasoline in the bilge is an extreme fire and explosion hazard which may cause injury or death. Find and fix the source of the leakage, remove the liquid gasoline from the bilge.
  • Page 19 Boating Safety • Not operate the engine in a confined space or while tethered to another vessel as CARBON MONOXIDE will be around the boats. • Not go under the boat cover with the engine running or shortly after the engine has been running because CARBON MONOXIDE may remain under the cover.
  • Page 20 Section 1 • Be aware that your boat will handle differently depending on loading and on-board weight distribution. • Ensure that all passengers are properly and securely seated in appropriate seating locations to avoid falling or falling overboard. • Instruct and ensure that passengers remain properly seated at all times while the boat is in motion above idle speed.
  • Page 21 Boating Safety • Keep track of tow lines and dock lines so that they do not become entangled in the propeller. A tow line will wrap quickly around a spinning propeller and is capable of immobilizing the boat and dragging a person entangled in the tow line underwater or causing amputations.
  • Page 22: Safety While Maintaining The Vessel

    Section 1 Safety While Maintaining the Vessel Failure to follow these precautions may result in severe injury or death to you and/or others. The operator shall: • Visually inspect the engine compartment and ventilate after refueling. • Inspect fuel system regularly. Examine fuel tanks, hoses and fittings for leaks or corrosion at least annually because leaking fuel is a fire and explosion hazard.
  • Page 23: Owner Responsibility And Boating Education

    Boating Safety • Be aware that battery electrolyte fluid is dangerous. It contains sulfuric acid, which is poisonous, corrosive and caustic. If electrolyte fluid is spilled or placed on any part of the human body, immediately flush the area with large amounts of clean water and immediately seek medical attention.
  • Page 24: Registration

    Section 1 This manual is not intended to provide complete training on all aspects of boat operation. We strongly recommend that all operators of this boat seek additional training on boat handling and safety. Have all operators become familiar with the handling characteristics, and proper steering and control system usage before attempting high-speed operation.
  • Page 25: Insurance

    Boating Safety Insurance The boat owner may be legally responsible for damages or injuries caused by both himself and the operator (if different than the owner). Common sense dictates that you carry adequate personal liability and property damage insurance on your boat, just as you would on your automobile.
  • Page 26: Operation By Minors And Licensing

    Section 1 The following is a list of some other agencies and organizations that offer Water Safety, First Aid and CPR courses or information. To find boating safety courses in your area, call your state’s local boating agency or the USCG boating safety course line at 1-800-336-2628 (1-800-245-2628 in Virginia).
  • Page 27: Safety And Required Equipment

    Boating Safety Safety and Required Equipment Your boat and equipment must be in compliance with federal, state and local safety equipment regulations. USCG regulations require certain safety equipment be present on your boat during operation. For a detailed description, obtain “Federal Requirements for Recreational Boats”...
  • Page 28: Navigation Lights

    Section 1 Navigation Lights Your boat is equipped with navigational lights. Recreational boats are required to display navigational lights between sunset and sunrise and other periods of reduced visibility (fog, rain, haze, etc.). Navigation lights are provided to keep other boats informed of your presence and course.
  • Page 29: Personal Flotation Devices

    Boating Safety • DO NOT route the lanyard where it could become entangled, preventing it from functioning. • Avoid accidentally pulling the lanyard during normal operation. • Loss of engine power means loss of most steering control. • Without engine power, the boat will decelerate rapidly. This could cause people in the boat to be thrown forward or ejected overboard if they are not properly seated in the boat.
  • Page 30 Section 1 is especially important that children and non-swimmers wear a life jacket (PFD) at all times. Make certain all passengers know where life jackets are located, how to put on and properly adjust their life jackets (PFDs), and that life jackets are readily accessible at all times.
  • Page 31 Boating Safety Type IV Throwable Device: These are designed to be thrown to a person in the water. Throwable devices include boat cushions, ring buoys, and horseshoe buoys. They are not designed to be worn and must be supplemented by wearable PFD.
  • Page 32: Fire Extinguisher

    Section 1 Fire Extinguisher A portable fire extinguisher is required if your boat has an inboard engine, or when fuel is stored in closed stowage compartments. Approved fire extinguishers are classified by a letter symbol, either B-I or B-II with the B designating that the material will extinguish flammable liquids...
  • Page 33: Visual Distress Signals

    Boating Safety leaks, missing drain plug, exhaust system or ballast system failures, etc.), and/or return to shore. Excess water in the bilge of your boat can cause loss of engine power, sinking, and/or capsizing. Visual Distress Signals All vessels used on coastal waters, the Great Lakes, territorial seas, and those waters connected directly to them up to a point where a body of water is greater than two miles wide, must be equipped with USCG approved visual distress signals.
  • Page 34: Recommended Safety Equipment

    Section 1 Recommended Safety Equipment As a precaution, a prudent boater will avoid potential problems on an outing by having additional equipment on board. Normally, this equipment is dependent on the size and type of the body of water and the length of the trip. Your dealer can assist you in acquiring this additional equipment.
  • Page 35: General Boating Safety Topics

    Boating Safety General Boating Safety Topics Safe Speed Navigation rules state that a boat be operated at a safe speed at all times. Determination of a safe speed involves consideration of many factors, such as, but not limited to: • Boating activity (tubing, water skiing, wakeboarding, wake surfing, etc.) •...
  • Page 36: Carbon Monoxide Safety

    Section 1 • Ensure that all passengers are properly and securely seated in appropriate seating locations to avoid falling or falling overboard. • While the engine is running, and while the boat maneuvering, all occupants should be properly seated. DO NOT stand while the boat is moving.
  • Page 37 Boating Safety Carbon monoxide (CO) can cause brain damage or death. Engine and generator exhaust contains odorless and colorless carbon monoxide gas. Carbon monoxide will be around the back of the boat when engines or generators are running. Move to fresh air, if you feel nausea, headache, dizziness, or drowsiness.
  • Page 38 Section 1 Hazardous boating situations involving carbon monoxide include: Blockage of boat exhaust by obstruction. Exhaust traveling along obstruction. Operating with high bow angle. Operating at slow speed or while dead in the water. Exhausts from other vessels in confined areas. Operating with canvas tops and side curtains in place without ventilation.
  • Page 39: Proper Loading

    Boating Safety American Boat & Yacht Council, Inc. 613 Third St., Suite 10, Annapolis, MD 21403 410-956-4460 www.abycinc.org Proper Loading DO NOT overload your boat. Overloading or uneven loading can cause loss of control, capsizing, or swamping, which may lead to death or serious injury.
  • Page 40: Weighting Your Boat During Watersport Activities

    Section 1 The capacity plate has the following information permanently printed on it: • The total weight of persons, gear and other items which the boat is capable of carrying under normal conditions. This weight must include any added ballast above and beyond boat manufacturer’s factory installed ballast system(s).
  • Page 41 Boating Safety When loading your boat, give attention to the effect that the load distribution has on the boat’s trim angle. Trim angle is the technical term for the up or down pitch angle of your boat (also known as the “bow up”...
  • Page 42: Visibility Of The Operator

    Section 1 It is the boat operator’s responsibility to tell passengers to move to other seats on the boat, so as to not overload the stern or bow of the boat, nor restrict the boat operator’s forward visibility. There is no single recommended seating or load distribution for all conditions.
  • Page 43: Boating Under The Influence

    Boating Safety Obstructed visibility can cause death or serious injury. The operator must maintain clear visibility at all times while operating the boat. Arrange passengers and equipment appropriately or designate a passenger to assist when visibility is limited. Boating Under the Influence Operating a boat or boating under the influence of alcohol and/or drugs can cause serious injury or death.
  • Page 44: Product Misuse

    Section 1 Impaired operation may result in severe personal injury or death. Federal and state laws prohibit operating a boat under the influence of alcohol and other drugs. If the operator’s blood alcohol content is above the legal limit, violators are subject to fines and may go to jail. Violators may also lose automobile driving privileges.
  • Page 45: Rendering Assistance

    Boating Safety Rendering Assistance If you see a distress signal or suspect a boat is in trouble, you must assume it is a real emergency and render assistance immediately. By law, the operator in charge of the craft is obligated to provide assistance to any individual in danger, presuming assistance can be safely provided.
  • Page 46 Section 1 Weeds Weeds can generally be a threat to a boat’s engine and other components on the boat. If weeds wrap around the propeller, they can create vibration in the engine. They also can restrict water intakes or clog the water filter causing the engine to overheat.
  • Page 47: Environmental Concerns

    Boating Safety Environmental Concerns As a boater, you already appreciate nature’s beauty and the peace of the great outdoors. It is a boater’s responsibility to protect the natural environment by keeping waterways clean. Foreign Species If you trailer your boat from lake to lake, you have the potential of unknowingly introducing a foreign aquatic species from one lake to the next.
  • Page 48 Increased exhaust (hydrocarbon) emissions pollute our water and air. Keep your engine tuned and boat hull clean for peak performance. Consult your Nautique dealer for information. Paints If your boat is kept in water where marine growth is a problem, the use of anti-fouling paint may reduce the growth rate.
  • Page 49 Boating Safety Cleaning Agents Household cleaners should be used sparingly and not discharged into waterways. Never mix cleaners and be sure to use plenty of ventilation in enclosed areas while cleaning your boat. DO NOT use products which contain phosphates, chlorine, solvents, non-biodegradable or petroleum based products.
  • Page 50: On Product Warning Labels

    On Product Warning Labels Warning Labels & Locations Warning labels are placed at specific locations on your Nautique boat at the time of manufacture to alert you to potential hazards that may not be obvious. These labels also indicate how to avoid these hazards.
  • Page 51: Throttle Control

    Boating Safety CORC091A CORC007A Tow Pylon Water Strainer CORC006A CORC216A Inside Engine Box and Throttle Control Fuel Fill CORC008A CORC010A Transom Warning Cross Member/ Boarding Platform WARNING! BEFORE OPERATING ENGINE, INSPECT FOR LEAKAGE If leakage is present, do not operate engine! CORC092A Engine 1-39...
  • Page 52 Section 1 Avoid personal injury or property damage caused by flying objects. Remove any items from WARNING! DO NOT board racks when trailering boat. ATTEMPT TO START OR OPERATE ENGINE WITH FLAME ARRESTOR REMOVED CORC094A CORC093A Flame Arrestor Board Racks CORC064A Walk Through Windshield CORC0261...
  • Page 53 Boating Safety Failure to follow these guidelines can result in injury or death. Do not tow more than two persons at one time from this tow tower. tower should only be used for waterskis, wakeboards, or recreational towables and not for parasailing, kite flying, towing other...
  • Page 54: Basic Rules Of The Road

    Section 1 Basic Rules of the Road Boating Regulations The U.S. Coast Guard (USCG) is the governing authority of the United States waterways and serves to help the boating public. State boating regulations are enforced by local authorities. Owners and users outside of the United States must be cognizant of that country’s laws and regulations.
  • Page 55: Encountering Another Vessel

    Boating Safety The nautical Rules of the Road must be followed to prevent collisions between vessels. Like traffic laws for automobiles, the operator is legally required to follow the rules. Collisions between boats can cause death or serious injury. Keep a proper lookout, safe speed, and follow the nautical “Rules of the Road.”...
  • Page 56 Section 1 Burdened Vessel The burdened vessel does not have the right-of-way and has the duty to take positive and timely action to stay out of the way of the privileged vessel. Normally, the burdened vessel should not cross in front of the privileged vessel.
  • Page 57 Boating Safety Conversely, the following illustration depicts a situation in which you are the boat in the center and you are the burdened vessel. You must give right-of-way to all vessels coming towards you from the directions shown in green. Meeting Head-On When meeting head-on, neither vessel has the right of way.
  • Page 58 Section 1 Overtaking The boat that is overtaking one ahead of it is the burdened boat and must make any adjustments necessary to keep out of the way of the privileged boat, until the burdened boat is well ahead and clear of the vessel being overtaken.
  • Page 59: Aids To Navigation

    Boating Safety If you navigate these type of waters, you should carry a portable air horn, which are available from local marine supply stores. Aids to Navigation Learn to recognize the different buoys and day markers; they are the signposts of the waterways. The United States Aids to Navigation System (USATONS) is the primary marking system used on inland water, coastal waters and rivers in the United States.
  • Page 60 Section 1 FWMS System The FWMS Lateral System is for use on navigable waters except Western Rivers and Intercoastal Waterways. The markings on these buoys are oriented from the perspective of being entered from seaward (the boater is going toward the port). This means that red buoys are passed on the starboard (right) side of the vessel when proceeding from open water into port, and green buoys to the port (left) side.
  • Page 61 Boating Safety Lights, bells and horns are used on buoys for night or poor visibility conditions. Buoys with unique light flashing characteristics are identified on nautical charts with the specific flashing pattern. Types of Buoys There are several types and shapes of buoys. Buoys may be unlighted, lighted, with sound or may have both an audible and a visual signal.
  • Page 62 Section 1 Mooring Buoys The only buoys from which you are permitted to moor are mooring buoys. Mooring buoys are white with a blue horizontal stripe. Mooring to a navigation buoy, regulatory markers or lateral markers is illegal. Mooring Buoy – White with Blue Band May Show White Reflector or Light 1-50...
  • Page 63 Boating Safety Uniform State Regulatory Markers Regulatory markers indicate dangerous or restricted controlled areas. These markers are used to indicate speed zones, areas set aside for particular use, general information and directions. Regulatory markers are white with orange geometric shapes and also have orange bands near the top and at the water line of the buoy.
  • Page 64 Section 1 Warning Markers It is a good idea to ask local authorities if there are hazardous areas and how they are marked. Boaters must also recognize the flag designs, which indicate that skin divers are present and keep well clear of the area.
  • Page 65: Night Running

    Boating Safety Night Running Boats operating between sunset and sunrise (hours vary by state) must use navigational lights. Nighttime operation, especially during bad weather or fog can be dangerous. All “Rules of the Road” apply at night, but it is best to slow down and stay clear of all boats, regardless of who has right of way.
  • Page 66 Section 1 Sailboats and Watercraft Under Oars Sailboats less than meters (65.62 feet) may exhibit the navigation lights shown in Figures 3 or 4. Figure 3 Figure 4 Another option for sailboats is to use a single combination lantern at the top of the mast as shown in Figure 5.
  • Page 67 Boating Safety Sailboats less than 7 meters (22.96 feet) may carry an electric torch or lighted lantern showing a white light to be displayed in sufficient time to prevent collision (see Figure 6 - left picture). If practicable, the lights prescribed for sailboats less than 20 meters should be Figure 6 displayed.
  • Page 68: Watersports Safety

    Section 1 Watersports Safety Skiers or riders are obligated to be aware of the same fundamental safety rules as boat operators. If you are new to water skiing, wakeboarding, wake surfing, and other towed watersports, seek certified training before starting. You will find it especially helpful to join a local ski club, World Wakeboard Association, and/or the USA Water Ski, when possible.
  • Page 69 Boating Safety Failure to adhere to these warnings may result in severe injury or death to you and/or others. • Every towed person must always wear a USCG- approved personal flotation device. • Always have an experienced driver and a designated observer in the boat while being towed.
  • Page 70: Hand Signals

    Section 1 Hand Signals Make sure that everyone knows and uses approved towed watersports hand signals, shown below. Circle Back to Dock Skier in Water Cut Engine Skiers OK Speed OK Speed Faster STOP Speed Slower Turn Left Turn Right Towed Person Safety Responsibilities Most injuries and fatalities that occur on high-performance recreational tow boats occur to the persons being towed (water...
  • Page 71 Boating Safety Operators should: • Assign a passenger to be a designated observer. • Turn the engine off whenever a person is on the swim platform or in the water near the boat. This is especially important for the area near the back of the boat to avoid propeller injuries.
  • Page 72: Additional Precautions For Towed Skier/Rider

    Section 1 • Monitor the tow line to ensure that it does not become tangled, it does not become wrapped around anyone in the boat, and it does not become wrapped around the towed person. Also monitor the tow line so that it does not become tangled in the propeller.
  • Page 73 Boating Safety • Slowly take up slack in tow lines before accelerating to watersports speeds. Jerking the slack out of a tow line can cause high forces on the rope and towing equipment. This may cause the rope or equipment to break and the rope to snap back at occupants of your boat and at the towed person.
  • Page 74: Tow Line Guidelines

    Section 1 • Never climb, sit or stand on a wakeboard tower. The wakeboard tower is intended for towing only as noted. It is designed to pull a limited number of individual(s), and in some cases only one (1) individual. Please consult the remainder of this manual and warning labels on tower for details.
  • Page 75: Fallen Skier Or Rider

    Boating Safety • Never use a tow line with elastic or bungee material to pull skiers or riders. • Tow line should be attached to the watercraft in an approved fashion with hardware designed for towing. Refer to your watercraft manual for instructions on proper tow line attachment.
  • Page 76: Develop Water Sense

    Section 1 Develop WATER SENSE The Watersports Responsibility Code and the Watersports Safety Code have been developed by WSIA and industry equipment manufacturers. These Codes are reproduced here for your reference. Watersports Responsibility Code Familiarize yourself with and follow The Watersports Responsibility Code 1-64...
  • Page 77 Boating Safety Watersports Safety Code WATERSPORTS SAFETY CODE Before you get in the water: Skiing or riding instruction is recommended before use. Instruction will teach general safety guidelines and proper skiing or riding techniques, which may reduce your risk of injury. For more information on skiing or riding schools, contact your dealer, Association, or local ski club.
  • Page 78 Section 1 Carbon Monoxide: The exhaust from the engine on a watercraft contains Carbon Monoxide (CO) which is a colorless, odorless and poisonous gas. Excessive exposure to CO can cause severe injury or death. Follow this advice to avoid injury. •...
  • Page 79 Boating Safety Preparing to ski or ride: Always have a person other than the driver act as an observer to look out for the skier/rider. • Be sure the driver is aware of the experience and ability of the skier/rider. •...
  • Page 80 Section 1 Fallen skier or rider: Falling and injuries are common in skiing or riding. • Circle a fallen skier/rider slowly to return the tow rope handle or pick up the fallen skier/rider. • Turn off the engine when near a fallen skier/rider. •...
  • Page 81: Emergency Procedures

    Boating Safety Emergency Procedures In an emergency situation, you may have to resort to measures which are not commonly practiced. Always assess the dangers of being in harm’s way versus the protection of equipment. Keep a sound mind during an emergency and always use common sense. Explosion and Fire Many boat fires and explosions involve flammable liquids such as gas or oil, which are used in your boat’s propulsion engine(s) and...
  • Page 82: Swamping And Flooding

    Section 1 • Throw burning materials overboard if possible. • Move anyone not needed for firefighting operations away from the flames. • Signal for help. • Put on PFDs (Personal Flotation Devices), grab distress signals and survival gear, and prepare to abandon ship. Burn hazard from gasoline floating on water which is ignited can cause death or serious injury.
  • Page 83: Capsizing

    Boating Safety Capsizing • If others were on board, try to locate them, make sure that they are conscious and they can swim. • If possible, access lifejackets (PFDs), pass them out to everyone, and put them on. • STAY WITH THE BOAT! A boat will usually float even if there is major hull damage.
  • Page 84: Grounding

    Section 1 Grounding In the event you run aground, assess the situation before proceeding. Your response to grounding will depend on how hard the boat hits bottom and whether the boat remains stranded, the extent of damage, and proximity to shore and help. •...
  • Page 85: Drowning

    Boating Safety Drowning • Swim to rescue a drowning victim only as a last resort. • Immediate resuscitation is critical! It may be possible to revive a drowning victim who has been under water for some time and shows no sign of life. Start CPR immediately and get the victim to a hospital as quickly as possible.
  • Page 86 Section 1 A recreational boat towing another should be a last resort due to the potential for damaging one or both boats. The Coast Guard or a private salvage company is better equipped for this activity. A recreational boat may assist by standing by, and possibly by keeping the disabled boat’s bow at a proper angle until help arrives.
  • Page 87 Boating Safety Vessel Being Towed • Attach the towline to the bow eye. • If it is necessary to be towed after being freed, keep someone at the wheel to steer. Both Vessels • If you attach the towline to a fitting, be sure the fitting is fastened with a through bolt and is reinforced on the underside.
  • Page 88 Section 1 NOTES 1-76...
  • Page 89: 200-Ob, 200-Cb, 200-V

    Section 2 200-OB, 200-CB, 200-V Specifications 200-OB, 200-CB Length Overall............20' 0" (6.10 m) Length with Platform..........21' 10" (6.65 m) Lifting Ring Spacing ..........18' 10" (5.73 m) Beam................95" (2.41 m) Draft................22" (0.56 m) Approximate Dry Weight*......2,800 lbs (1,270 kg) Fuel Capacity .............27 Gallons (102 L) Maximum Capacity: Open Bow........9 People (1,450 lbs/658 kg) Closed Bow ........7 People (1,450 lbs/658 kg)
  • Page 90 Section 2 The dash configurations used in this section may show more features than what is included in your Nautique. Accessory Indicator Light Ignition Indicator Light...
  • Page 91: Nautique Dash Pod And Console

    200-OB, 200-CB, 200-V 200 Nautique Dash Pod and Console 1. Stereo 2. RPM 3 in 1 Gauge w/Oil & Temp 3. Service Soon Light 4. Check Engine Light 5. Speedometer 3 in 1 Gauge w/Fuel & Volt 6. Keypad 7. Fire Extinguisher System – optional 8.
  • Page 92 Section 2 Accessory Indicator Light Ignition Indicator Light CORC0266c...
  • Page 93: 200-Ob, 200-Cb Team Dash Pod And Console

    Pod and Console 1. Pocket Panel 2. Warning and Danger Decal 3. RCA Video Input 4. USB and Auxiliary Input* 5. Nautique LINC System 6. Keypad 7. Fire Extinguisher System – optional 8. SportShift™ Hydro-Gate™ Control Handle 9. Shifter/Throttle Control Handle 10.
  • Page 94 Section 2 Accessory Indicator Light Ignition Indicator Light...
  • Page 95: 200-V Team Dash Pod And Console

    200-V Team Dash Pod and Console 1. Pocket Panel 2. RCA Video Input 3. USB and Auxiliary Input* 4. Nautique LINC System 5. Keypad 6. Fire Extinguisher System – optional 7. Zero Off Speed Control 8. SportShift™ Hydro-Gate™ Control Handle 9.
  • Page 96 Section 2...
  • Page 97: Keypad

    200-OB, 200-CB, 200-V Keypad 1. Stop Function 2. Blower Indicator 3. Blower Function 4. Navigation Light Indicator 5. Navigation/Anchor Light Function 6. Anchor Light Indicator 7. Bilge Function 8. Bilge Indicator 9. Horn Function 10. Code Buttons 11. Ignition Indicator 12.
  • Page 98: Open Bow Deck Layout

    Section 2 200 Open Bow Deck Layout CORC0277 2-10...
  • Page 99 200-OB, 200-CB, 200-V 200 Open Bow Description 1. Bow Navigation Light 2. Bow Lifting Ring 3. Horn 4. Bilge Pump Outlet 5. Dash Pod 6. Standard Speedometer Calibration Adjustment 7. Console 8. Engine Cover 9. Rudder Shaft Remote Lube Fitting 10.
  • Page 100: Closed Bow Deck Layout

    Section 2 200 Closed Bow Deck Layout CORC0277 2-12...
  • Page 101 200-OB, 200-CB, 200-V 200 Closed Bow Description 1. Bow Navigation Light 2. Bow Lifting Ring 3. Horn 4. Bilge Pump Outlet 5. Dash Pod 6. Standard Speedometer Calibration Adjustment 7. Console 8. Engine Cover 9. Rudder Shaft Remote Lube Fitting 10.
  • Page 102: 200 V-Drive Deck Layout

    Section 2 200 V-Drive Deck Layout CORC0310 CORC0310 2-14...
  • Page 103 200-OB, 200-CB, 200-V 200 V-Drive Description 1. Bow Navigation Light 2. Bow Lifting Ring 3. Belly Ballast Tank Vent 4. Dash Pod and Console 5. SportShift™ Hydro-Gate™ Control Handle 6. Removable Pylon 7. T-Handle Drain Plug 8. Engine Cooling Water Intake Shutoff Valve 9.
  • Page 104: 200-Ob Seating Area

    Section 2 200-OB Seating Area Designated Seating Area 2-16...
  • Page 105: 200-Cb Seating Area

    200-OB, 200-CB, 200-V 200-CB Seating Area Designated Seating Area 2-17...
  • Page 106: 200-V Seating Area

    Section 2 200-V Seating Area Designated Seating Area 2-18...
  • Page 107: Standard And Optional Equipment

    200-OB, 200-CB, 200-V Standard and Optional Equipment Nautique boats are equipped with only the finest standard and optional equipment available. Your boat’s equipment will vary, based on how your boat was built. Many options can only be installed during the manufacturing of the boat and cannot be retro- fitted to boats in the field.
  • Page 108 Section 2 NOTES 2-20...
  • Page 109: Controls And Indicators

    Improper maintenance may result in a loss of control, possibly causing serious injury or death. Steering The steering system in your Nautique boat provides excellent maneuvering performance for pleasure boating or during watersports. Boat steering is not self-centering. Always keep a secure grip on the steering wheel to maintain full boat control.
  • Page 110: Hydro-Gate™ Control And Sportshift

    Section 3 The helm transfers rotary motion of the steering wheel to linear motion in the cable which pushes or pulls the rudder. Nautique rudders are equipped with an adjustable trim tab under license from Z-Marine (U.S. patent 5,746,147) to compensate for the torque generated by the propeller.
  • Page 111 Controls and Indicators CORC142A CORC143A...
  • Page 112: Shifter/Throttle

    DO NOT replace the control with a control that does not have this feature. Your Nautique boat is equipped with a Shifter/Throttle Control Handle which features a start-in-gear protection to prevent the boat from moving when started.
  • Page 113: Emergency Stop Switch

    Controls and Indicators Emergency Stop Switch The emergency stop switch will stop the engine when the lanyard is pulled far enough to disengage it from the switch. Attach the lanyard to the boat operator whenever the engine is running but be aware there will be a loss of engine power if the switch is activated.
  • Page 114: Nautique Dash Pod

    Once a month: Check the emergency stop switch for proper operation. With the engine running, pull lanyard. If the engine does not stop, see your Nautique dealer for service of the switch. Nautique Dash Pod Gauges RPM 3 in 1 Gauge w/Oil &...
  • Page 115 Speedometer 3 in 1 Gauge w/Fuel & Volt • Speedometer - Your Nautique is equipped with a precision speedometer by Faria. This gauge registers forward speed in miles per hour (optional kilometers per hour). The speedometer is equipped with an adjustment knob to calibrate speedometer accuracy.
  • Page 116: Speedometer Calibration

    Section 3 Service Soon Light - For quality control check. When ignition is turned on without cranking the engine, the red “check engine” light will turn on for a few seconds and then turn off. The amber “service soon” light will turn on and stay on until either the engine is started or the ignition is switched off.
  • Page 117 Controls and Indicators Explosion and fire hazard from gasoline vapors can cause death or serious injury from failure to check for fumes in the engine compartment or operating the blower. Before engine start-up, check engine compartment for gasoline vapors, then operate blower for at least four minutes.
  • Page 118 This pumping system should not be relied on over an extended period of time. Frequently inspect your boat for evidence of excessive water in the bilge area. Consult your Nautique dealer if you have any questions. Trash in bilge area can damage the bilge pumps.
  • Page 119: 12-Volt Port

    This light will be off when the engine is running. Heater Switch-Optional The optional heater can be turned on through the Nautique LINC display (Team boats only) or a switch mounted on the driver’s throttle panel (Nautique boats).
  • Page 120: Nautique Digital Cruise

    Section 3 Nautique Digital Cruise Home Screen When the ignition is turned to the ON position, the Nautique Digital Cruise gauge will flash the Nautique corporate logo until the internal software is booted up, then the display screen will show the following: •...
  • Page 121 Nautique Cruise, press and release the ON/OFF/MENU button. Nautique Digital Cruise will still control the speed until the throttle is reduced below the set speed. Set speed can be adjusted with the Nautique Digital Cruise on or off by pressing the UP/DOWN arrow buttons until the desired speed is displayed on the screen.
  • Page 122 Section 3 Depth The Depth function includes an audible and visual alarm that can be set to sound when a minimal water depth is present. If audible alarm sounds, pressing the SELECT button will silence the alarm. The alarm resets itself when the boat enters water that is deeper than the shallow setting.
  • Page 123: Team Dash Pod

    Controls and Indicators Team Dash Pod Keypad Keyless Ignition The ignition switch system is keyless and has three modes of operation. CAUTION The keypad and switch control box will be damaged beyond repair if the boat's battery cables, the main switch control box power leads or battery charger leads are reversed.
  • Page 124 Section 3 Unlocked Mode Unlocked mode is entered after the user successfully enters the user code, presses and releases the start key. When the code keys are pressed, the system indicator light will turn ON while the key is pressed. This indicates the key has actually been pressed. When the system is unlocked, power is supplied to the boat and the system indicator light will turn ON.
  • Page 125 The “Primary User Code” is programmed into the system by the owner with the Nautique dealer’s help at the time of boat delivery. This code is used to unlock the system, to lock the system and to add or change the “Secondary User Code.”...
  • Page 126 Section 3 The Power Indicator Light is on the left side of the START button on the keypad and the Accessories Indicator Light is on the right side. Programming the Primary User Code Until a Primary User Code is set, the keyless ignition does not require the entry of a code to unlock the system or start the engine.
  • Page 127 Controls and Indicators Changing the Primary User Code The current primary code must be used to change to another primary code. Make sure the system indicator light is OFF. 1. Enter the Primary User Code, then press and release the 1/2 key and the 7/8 key at the same time to put the system in the code programming mode.
  • Page 128: Switches

    Section 3 To lock the system, re-enter any of the three codes and press STOP. Erasing the User Codes Make sure the system indicator light is OFF. Enter the Master Embedded Code, then press and release the 1/2 key and the 7/8 key at the same time to erase the system user codes. The keyless ignition will now act as if there are no codes in memory.
  • Page 129 Controls and Indicators Engine Compartment/Bilge Area Blower The bilge area and engine compartment blower is turned on or off by pressing and releasing the button. The indicator light for this key will illuminate when the blower is on. Explosion and fire hazard from gasoline vapors can cause death or serious injury from failure to check for fumes in the engine compartment or operating the blower.
  • Page 130: Nautique Linc 2.0

    Section 3 Nautique LINC 2.0 Product Information The Nautique LINC 2.0 display is designed for instrumentation and control on electronically controlled engines communicating via SAE J1939 and NMEA 2000. The display is a multifunctional tool that provides GPS tracking, multimedia display, speed control, and enables equipment operators to view many different engine parameters and service codes.
  • Page 131: Basic Navigation Features

    Controls and Indicators Basic Navigation Features All product features are easily accessed through Quick Access Keys, Menus, and Soft Key commands. Quick Access Keys The keys located to the left of the display provide one-button access to Home, Map, Media, Switching, 3 Event, User Profiles and Preferences.
  • Page 132: Quick Access Key Features

    Section 3 Quick Access Key Features This section describes the features accessed through the Quick Access Keys located to the left of the display. Home Display The Home Display screen for viewing engine statistics can be accessed by pressing the Quick Access Key Pressing or any other key launches the Soft Key Commands to overlay the right side of the display.
  • Page 133 Controls and Indicators Home Display – Soft Key Commands Soft Key Description VOLUME UP – press this soft key to increase the volume of the stereo. VOLUME DOWN – press this soft key to decrease the volume of the stereo. SPEED CONTROL –...
  • Page 134 Section 3 Soft Key Description The Change View soft key toggles through the different views available on the home screen. They are: • Engine Statistics • Engine Hours and Air and Water Temperatures • Map view • 3 Event view •...
  • Page 135 Controls and Indicators Map Display The Map Display screen can be accessed by pressing the key. The Map feature displays map data, latitude and longitude coordinates, depth and speed. Soft Key Description UP – facilitates navigating the map by moving the cross-hairs accordingly.
  • Page 136 Section 3 Soft Key Description CENTER – returns the crosshairs to the center of the cursor. WAYPOINTS – displays a list of waypoints. CREATE WAYPOINT – displays a keyboard. Enter a name for the waypoint. The waypoint will be set where the cursor has been placed.
  • Page 137 Controls and Indicators Soft Key Description CLEAR TRACK – clears the currently displayed track. SAVE TRACK – displays a keyboard. Enter a track name. The Track can be edited in Map Utilities. LEFT – RIGHT – UP – DOWN ARROWS – navigate the keyboard.
  • Page 138 Section 3 Media Display The Media Display can be accessed by pressing the Quick Access This feature provides universal control to the Polk stereo mimicking all the controls of a standard remote control. Nautiques with the LINC displays will support the following multi-media functions: •...
  • Page 139 Controls and Indicators Soft Key Description PREV TRACK – plays the previous track of the current input and other functions depending upon the input mode. NEXT TRACK – plays the next track of the current input and other functions depending upon the input mode. PAUSE/MUTE –...
  • Page 140 Section 3 Media Settings Menu – Soft Key Commands Soft Key Description AUDIO SETUP – brings up a menu to adjust the balance, fade, bass, treble and equalizer preset. The “loudness” setting can be turned on or off here as well. AUTO VOLUME UP –...
  • Page 141 Controls and Indicators Bluetooth Menu The Bluetooth menu can be accessed by pressing the soft key from the Media Settings menu. Bluetooth Menu – Soft Key Commands Soft Key Description PAIR – searches for nearby Bluetooth devices to pair with. Please ensure that the Bluetooth device you are trying to connect with is in “discoverable mode”...
  • Page 142 Section 3 User Profiles The User Profile screen can be accessed by pressing the Quick Access Key. This feature displays rider/skier profiles containing speed and 3 Event settings. The unit comes preloaded with default user profiles and the ability to create additional users. 3-34...
  • Page 143 Controls and Indicators User Profile Screen - Soft Key Commands Soft Key Description EVENT MODE – default user that contains settings and features for 3 Event. Please refer to the 3 Event owner’s manual. EDIT USER – provides utilities for adding new users, editing existing users.
  • Page 144 Section 3 Soft Key Description Press the LEFT, RIGHT, UP or DOWN arrow soft keys to navigate the keyboard. Select BACK at the top of the keyboard to remove unwanted letters. Select MORE CHARACTERS to toggle capital/lowercase letters and numbers. Select SPACE to add a space between characters.
  • Page 145 Controls and Indicators New User Profile Soft Key Description Press the LEFT, RIGHT, UP or DOWN arrow soft keys to navigate the keyboard. Select BACK at the top of the keyboard to remove unwanted letters. Select MORE CHARACTERS to toggle capital/lowercase letters and numbers. Select SPACE to add a space between characters.
  • Page 146 Section 3 Switching The switching button is used to control the lighting. The lights that are displayed and controlled with the device are dependent upon the boat model and dealer settings. The soft keys on the right of the display navigate the screen. In addition to controlling the lights on the boat, the other appliances that are not directly controlled by the display are shown.
  • Page 147 Controls and Indicators Soft Key Description UNDERWATER LIGHTS – (if equipped) turns on or off the underwater lights. HEATER – turns on or off the boat heater. FEATURES – displays the locations of key features on the boat. Press to toggle the highlighted feature. The features shown include: •...
  • Page 148 Section 3 Zero Off 3 Event The Zero Off 3 Event screen can be accessed by pressing the Quick Access key. This feature allows the operator to adjust intricate GPS speed settings related to competition-level slalom, jump and trick skiing. *Please see the separate Zero Off 3 Event owner’s manual for detailed instructions on how to properly operate Zero Off 3 Event on your LINC display.
  • Page 149 Controls and Indicators Preferences The Preferences screen is displayed when is pressed briefly. The following preferences can be set on this screen; use Next Setting to scroll to additional settings: • Home Button Slide (turn on or off) • Map Button Slide (turn on or off) •...
  • Page 150 Section 3 Soft Key Description SYSTEM SETTINGS (See Main Menu section for more information.) PREV SETTING – backs up to the previous setting. NEXT SETTING – advances to the next setting. UP – toggles through the available settings. DOWN – toggles through the available settings. SAVE –...
  • Page 151 Controls and Indicators Soft Key Description RESET ALL – displays the reset all system settings warning. YES – resets all the preferences to the default settings (excluding any user profiles). NO – cancels the reset action and returns to the Preferences screen.
  • Page 152: Nautique Linc 2.0 - River Mode

    Section 3 Nautique LINC 2.0 – River Mode Ski 200 LINC’s River Mode is a feature that allows the driver to keep the boat’s speed-over-water constant at the push of a button when a current is present. To compensate for the current, the boat’s speed- over-ground or “GPS speed”...
  • Page 153 Controls and Indicators Once on the User screen, select either the Trick or Wake users and press “set as current” to activate that user. Please be aware of the set speed for that particular user before pressing “set as current”. USER LINC User Screen CORC535...
  • Page 154 Section 3 Press “river mode” to toggle River Mode on. USER LINC Home Screen with Wake user activated and River Mode on CORC537 Press “main” to return the first menu of soft keys to control the set speed and offset for River Mode. USER LINC Home Screen with Wake user activated and River Mode on CORC538...
  • Page 155 Controls and Indicators This is the speed-over-water and equals the GPS speed (or speed-over-ground) increased by the USER LINC Home Screen with River Mode on equal the estimated current speed River Upstream/Downstream indicator (Depicted as downstream in the illustration) Set speed equals the desired “water speed” and is adjusted using speed up or down soft keys Soft Key Description OFFSET UP and OFFSET DOWN...
  • Page 156 Section 3 Sport 200 LINC’s River Mode is a feature that allows the driver to keep the boat’s speed-over-water constant at the push of a button when a current is present. To compensate for the current, the boat’s speed- over-ground or “GPS speed” must be adjusted up or down, depending on the direction of the boat relative to the current.
  • Page 157 Controls and Indicators Press “river mode” to toggle River Mode on. CORC0561 Press “main” to return the first menu of soft keys to control the set speed and offset for River Mode. CORC0562 3-49...
  • Page 158 Section 3 Soft Key Description OFFSET UP and OFFSET DOWN – adjust the o ffset up or down to equal the estimated current speed. – increases the o ffset. DOWN – decreases the o ffset. RIVER MODE UPSTREAM/DOWNSTREAM – should be pressed when driver is changing directions from upstream to downstream or vice versa.
  • Page 159 Controls and Indicators Operating and Adjusting River Mode Settings First, ensure that River Mode is turned on and navigate to the Home screen or 3-Event screen. Determine whether the boat will be traveling upstream or downstream and switch River Mode Upstream/Downstream on LINC accordingly.
  • Page 160 Section 3 Nautique LINC 2.0 – River Mode in Integrated Zero Off 3 Event On any screen, press the 3 EVENT key. LINC Home Screen CORC542 Once on the 3 Event screen, press the CHANGE EVENT button. USER LINC 3-Event Screen...
  • Page 161 Controls and Indicators Press the TOURN TRICK button to select a tournament-approved Trick Skiing event type. LINC 3-Event Screen CORC544 Once on the 3-Event screen with the “Tourn Trick” event type activated, press the RIVER MODE button. USER LINC 3-Event Screen CORC545 3-53...
  • Page 162 Section 3 The following screen shows River Mode in integrated Zero O ff 3 Event for Trick Skiing. Please note that the button layout is slightly di fferent than River Mode on the Home screen. LINC 3-Event Screen, in River Mode CORC546 The following screen shows River Mode at the desired set speed in integrated Zero Off 3 Event.
  • Page 163: Menu Options

    Controls and Indicators MENU Options The menu options are accessible by pressing the SYSTEM SETTINGS button on the PREFERENCES screen. The following features are available: • GPS Utilities – contains options to set up track and position, chart and time, and waypoint manager. Also displays satellite status.
  • Page 164 Section 3 Waypoint Manager Soft Key Description LEFT – RIGHT – UP – DOWN soft keys are used to navigate the different areas in the Waypoint Manager. WAYPOINTS – provides a list of waypoints that have been set using the tracking soft keys on the GPS Navigator screens. Use the up and down arrows to select a waypoint to edit the name, select an icon, Delete or Go To on the GPS Map.
  • Page 165 Controls and Indicators Soft Key Description GO TO... – takes you to the selected waypoint on the GPS map. Waypoint Manager – Go to Waypoint YES – Go to waypoint on the GPS Navigator Maps. NO – Do not go to the waypoint on the GPS Navigator Maps. Track Manager Soft Key Description LEFT –...
  • Page 166 Section 3 Chart and Time Setup Soft Key Description LEFT – RIGHT – UP – DOWN ARROW soft keys are used to navigate the different areas in the Chart and Time Setup. CHART SETUP PARAMETERS – turn on or off available settings: •...
  • Page 167 Controls and Indicators Depth and Position Settings Soft Key Description LEFT – RIGHT – UP – DOWN ARROW soft keys are used to navigate the different areas in the Depth and Position Settings. POSITION FORMAT SELECTION – select the position from available settings: •...
  • Page 168 Section 3 Satellite Status Soft Key Description This view only screen gathers data on prevailing satellites and shows the proximity of each. It also displays the following information: • Longitude • Latitude • Number of Satellites • Strength BACK TO GPS UTILITIES – select to go back to the GPS Utilities screen.
  • Page 169 Controls and Indicators Engine Diagnostics The following is a list of field definitions contained on the ENGINE DIAGNOSTICS screen: • Diagnostic Message – displays the diagnostic message. • Description – Most common SPNs and FMIs have text for the description stored in the display. If there is no text, then this SPN and FMI must be defined by referring to the engine manufacturer, or the SAE J1939 standard.
  • Page 170 Section 3 System Information Component Version Part No. Application The version number of the The part number for application installed on the the application. hardware. The version number of the The part number for operating system installed the operating system. on the hardware.
  • Page 171: Linc 2.0 General Troubleshooting Guide

    1. Check display supply wires are connected properly to battery. 2. Verify battery is charged properly. 3. Check battery for efficient starter current. Display has no backlight. Contact your Nautique service center. Display has no keypad backlight. Contact your Nautique service center. 3-63...
  • Page 172: Standard Equipment

    Although pylon extensions and barefoot booms have become popular additions to many tournament inboards, Nautique Boat Company strongly objects and opposes the use of any pylon extension, whether up or to the side of any of its products. The use...
  • Page 173: Bow Features - Open Bow Only

    Any time a dealer or consumer makes a change to our product, they do so at their own risk and sole liability. Nautique Boat Company, Inc. will not be held liable for unauthorized changes, whether deletions or additions, to the original equipment/product manufactured and sold by Nautique Boat Company, Inc., even if such changes and additions...
  • Page 174: Driver's Seat Adjustment

    Section 3 Driver’s Seat Adjustment The lever under the driver’s seat on the left side allows the seat to slide fore and aft. A seat or seats which are not locked in position can cause death or serious injury. Lock the seat(s) in position (fore and aft) before operating the boat.
  • Page 175: Rearview Mirror Adjustment

    Controls and Indicators Rearview Mirror Adjustment The rearview mirror can be positioned on the windshield to observe a skier and traffic behind you. The mirror should be lowered when trailering or when using a mooring cover. To reposition the mirror bracket on the windshield frame, loosen the three socket head screws and reposition and tighten the screws in the new location.
  • Page 176: Observer's Seat

    Section 3 Observer’s Seat Lift up on the bottom of the observer’s seat cushion to access storage under the bow area. The seat cushion and seat leanback will hinge upward together. CORC0278 3-68...
  • Page 177: 200 Engine Box Cover/Lifting/Removal

    Controls and Indicators 200 Engine Box Cover/Lifting/Removal The engine box cover is designed as a two-piece clam shell part. Lift up slightly on the latch located in the front of the box and open fully until it rests onto the stern seat. Access to the routine service items is now available.
  • Page 178: Walk-Thru Windshield Opening/Latching

    Section 3 Walk-Thru Windshield Opening/Latching There are two latches on the inside starboard side of the walk-thru windshield. Rotate both of the window locks (A) to secure or unlock the window. Always have window closed and secured when trailering the boat. CORC039B An open window can cause death or serious injury.
  • Page 179: Boarding Platform

    The boarding platform of your boat is a convenient feature to enhance the watersports experience. There are serious safety concerns regarding the use of the platform. Nautique Boat Company, Inc. has placed warning labels at the driver’s position, on the deck at the rear of the occupant area and on the transom. Refer to Section 1, Boating Safety, for more information.
  • Page 180 Section 3 The optional Nautique folding platform brackets allow you to fold the platform down 90 degrees for improved storage. To fold the platform, pull the lower pins, pull the platform slightly aft and lower. The platform can also be removed by pulling all four pins (A).
  • Page 181: Engine Cooling Water Intake Valve

    Controls and Indicators Engine Cooling Water Intake Valve Your Nautique is equipped with a valve (seacock) on the engine cooling water intake. The handle is red and has a slide mechanism to prevent the valve from being shut off inadvertently. The valve is used to shut off the water supply in the event a hose failure or water leakage occurs.
  • Page 182: Battery Disconnect Switch

    Rotate the switch to the OFF position when the boat is not in use. Nautique Electrical System To ensure proper electrical system boot up when using the battery switch, please wait at least 30 seconds after turning the switch on before entering the user code and starting the boat.
  • Page 183: Fuel Tank

    There is a fuel tank located under the deck behind the stern seat. To inspect the hose connections, remove the stern seat leanback. Your Nautique dealer should perform all fuel tank service. Explosion or fire can occur under certain conditions, causing death or serious injury: •...
  • Page 184: Optional Equipment

    If you choose the stereo option, your Nautique will come with a Clarion stereo and Polk Audio speakers. Tower speakers can be purchased as an option. Nautique mounts all of its stereos in the glove box on the dash. A digital remote control can be mounted on the lower left side of the dash pod and on the transom.
  • Page 185: Folding Instructions For Flight Control Tower Optional

    Controls and Indicators Folding Instructions for Flight Control Tower – Optional ® Crush hazard. The Flight Control Tower is heavy. Use care to fold or unfold the tower. Flight Control Tower ® Remove all boards from the board racks prior to folding the tower. Make sure to support the tower before unlocking the tower lock handles.
  • Page 186 Make sure the hardware is securely tightened after it is loosened. Nautique towers are pre-wired so audio speakers can be added to the tower. The plugs have a “fish line” to retrieve speaker wires through the towers.
  • Page 187: Bimini Top

    Controls and Indicators Bimini Top Your Nautique may be equipped with a bimini top which can be used for securing lighter watersports equipment. The top can be tilted by removing the aft pins (A) and allowing the top to tilt, to load the equipment.
  • Page 188: Rudder Remote Lube

    Optional accessories are available from your Nautique dealer. Your dealer may have a wide range of other accessories available to enhance your watersports or pleasure boating experience. Contact your Nautique dealer for more information. Here is just one of the fine accessories Nautique offers: • Pull-out Cleats...
  • Page 189: Boat Systems

    The fuel system consists of a built-in fuel tank, a fuel fill and a fuel tank vent. The fuel tank is located under the deck behind the stern seat. To inspect the hose connections, remove the stern seat leanback. Your Nautique dealer should perform all fuel tank service.
  • Page 190: 200-Ob, 200-Cb

    Section 4 200-OB, 200-CB ENGINE FUEL TANK VENT FUEL TANK FUEL FILL CORC0270...
  • Page 191: 200-V

    Boat Systems 200-V FUEL RETURN FUEL FEED FUEL TANK VENT FUEL FILL FUEL FILL FUEL FILTER CORC0473...
  • Page 192: Ballast Tanks And Bilge System

    Section 4 Ballast Tanks and Bilge System The Federal Water Pollution Control Act prohibits the discharge of oil or oily waste into the water. Violators can be fined $5,000.00. Do not allow water to accumulate in the bilge area of your boat.
  • Page 193: Ballast Tank Valves - 200-V

    Boat Systems Ballast Tank Valves – 200-V BELLY BALLAST PORT BALLAST STARBOARD RAW WATER T-HANDLE BALLAST CORC0305...
  • Page 194: Port And Starboard Ballast Tanks - 200-V

    Section 4 Port and Starboard Ballast Tanks – 200-V PORT STARBOARD INTAKE/DRAIN INTAKE/DRAIN VALVE VALVE VENT VENT REAR REAR BALLAST TANK BALLAST TANK PORT STARBOARD TANK PUMP TANK PUMP CORC0230...
  • Page 195: Bilge System - 200-Ob, 200-Cb

    Boat Systems Bilge System – 200-OB, 200-CB BILGE BILGE BILGE DRAIN BILGE DRAIN CORC100a...
  • Page 196: 12-Volt System - 200-Ob, 200-Cb

    Section 4 12-Volt System – 200-OB, 200-CB BATTERY SWITCH PANEL BATTERY CORC0279...
  • Page 197: 12-Volt System - 200-V Only

    Boat Systems 12-Volt System – 200-V Only BATTERY CIRCUIT PANEL BATTERY NEGATIVE STUD ON MOTOR ENGINE STARTER CORC0323...
  • Page 198: Cockpit Heater System - Optional

    Section 4 Cockpit Heater System – Optional HEATER ENGINE CORC098 4-10...
  • Page 199: Getting Underway

    • Raise the engine cover and smell for the presence of fuel vapors. If fuel vapors are detected, DO NOT OPERATE BOAT until the source of the vapors has been identified and corrected by a qualified Nautique Dealer service technician.
  • Page 200: Safety Equipment

    Section 5 Safety Equipment Federal and local laws require certain safety equipment to be on- board at all times. In addition, responsible boaters carry other equipment in case of emergency. Check with local boating authorities for any additional requirements over and above the federal requirements.
  • Page 201: Gasoline Containing Alcohol

    United States. As such, PCM Engines and Nautique provide the following information regarding the use of this fuel. This information addresses the use of ethanol fuels in PCM Engines and Nautique Boats.
  • Page 202: When Fueling

    Section 5 Without proper fuel filtration or fuel stabilization, ethanol blended fuel may cause the following: • Excessive moisture (water) can cause lean operation, hard starting, and operating difficulties such as vapor lock and low speed stalling, and can reduce fuel shelf life. •...
  • Page 203: After Fueling

    OFF when swimmers, divers and skiers are boarding or even near the platform. Boat Planing The performance of your Nautique boat depends on load weight and distribution. DISTRIBUTE WEIGHT EVENLY, from bow to stern, and also from port to starboard.
  • Page 204: Pre-Operation Checks

    Checking these items periodically will soon become a habit. If leaks or other abnormal conditions are found, stop using the boat and contact your Nautique dealer to have the problem corrected. Get into the habit of performing these checks in the same order each time so that it becomes routine.
  • Page 205 • Check all gasoline line connections. Connections are located at the fuel tank, the fuel control cell and the fuel injection system. All Nautique boats are equipped with anti-siphon valves on the outlet fittings of the fuel tanks to reduce the chance of fuel siphoning from the fuel tank if a fuel hose leaks or is severed.
  • Page 206 If the “dripless stuffing box” is leaking or water is coming in rapidly with the conventional stuffing box, pull the boat out of the water and have your Nautique dealer service the stuffing box.
  • Page 207 Getting Underway • Make sure there are no ropes, gear bags, arms/legs near the belts and pulleys of the engine. Severe injury can result by becoming entangled in the belts of the engine while it is running. Make sure the boat is deep enough in the water to supply the water intake with water to cool the engine.
  • Page 208 Section 5 In order to prevent personal injury to you or others, the engine cover must be closed whenever the engine is running. • DO NOT operate the engine with the engine cover open or while someone is in the area of an open engine cover. •...
  • Page 209: Flooded Engine

    Section 3, Run Mode. DO NOT operate the start switch for more than 30 seconds. Allow the starter to cool. We suggest you bring your boat back to your Nautique dealer after 25 hours of operation for an inspection of the shaft alignment, stuffing boxes adjustment, and the fuel system checked for leaks.
  • Page 210 Read the “Notice to Dealer” located in your Skipper’s Kit. It contains pre-delivery checks and adjustments which must be performed by your Nautique dealer. It is still the boat owner’s responsibility to make sure they were performed. This will also help you become more familiar with your boat and its systems.
  • Page 211: Break In Procedure

    Getting Underway Break In Procedure Make sure all your passengers are properly seated before starting the break in procedure. After the engine is thoroughly warmed up and you have driven the boat into a large open area, advance the throttle to wide open until the maximum rpms are reached. DO NOT exceed 5,000 rpm.
  • Page 212: Shifting

    Practice steering your boat. Make sure the steering system is working correctly and is properly maintained. CAUTION The steering system must be in good operating condition for safe boating. Frequent inspection, lubrication and adjustment by your Nautique dealer is recommended. 5-14...
  • Page 213: Stopping

    Getting Underway Stopping Stopping the engine immediately after operating at high speed is not recommended. Allow the engine a two to three minute cool- down period at idle or low speed. Refer to your engine operator and maintenance manual for stopping information.
  • Page 214 Section 5 NOTES 5-16...
  • Page 215: Running

    Section 6 Running Nautique urges you and all others operating your boat to seek certified instruction from the local boating authorities. This section is designed to present the most basic operational principles. It is NOT intended to cover all conditions encountered during operation.
  • Page 216: Maneuvering Techniques

    Steering response depends on three factors: rudder position, motion and throttle. Maneuvering in congested areas and advanced courses requires mastering and good “Rules of the Road” ethics. Your Nautique boat is designed to be responsive and agile enough to meet the challenge of these conditions.
  • Page 217: Tow Pattern

    Unequal thrust is an aspect shared by all single-engine propeller- driven watercrafts. Your Nautique boat has a clockwise (right-hand) rotation propeller. Propeller rotation has a direct effect on steering, especially when operating your boat in reverse. Operators should...
  • Page 218: Freezing Temperatures

    An anchor will usually hold best in a mixture of mud and clay or in hard sand. A Danforth anchor is recommended for general boating. For more information on anchors, contact your Nautique dealer. KC-1571C...
  • Page 219: Dropping Anchor

    Running Dropping Anchor • Make sure the line is tied to the anchor and tie the other end to the forward cleat or bow eye. • Head the boat into the wind or current over the spot where you want to lower the anchor. Spot the boat before lowering the anchor.
  • Page 220: Performance Boating

    Propellers Your Nautique boat is equipped with a propeller best matched to its engine and boat combination. If you feel you are experiencing poor performance, contact your Nautique dealer. Care and selection of your propeller is very important to proper boat operation.
  • Page 221: Care And Maintenance

    Section 7 Care and Maintenance This section describes how to care and maintain your Nautique boat. Periodic inspection and maintenance of items listed in this section is absolutely necessary. Winterization and some engine maintenance functions are best performed by your Nautique dealer. Some maintenance items that can be done by you or your dealer are listed below.
  • Page 222: Engine Intake Raw Water Strainer

    Section 8 4. When servicing the ignition switch or any wiring, always disconnect the battery cables from the battery. 5. Check for water circulation when the engine is running. Exhaust should contain steady flow of water. In closed cooling systems, make sure the coolant in the cooling system is at the proper level.
  • Page 223 Care and Maintenance Clean debris from the bowl and screen and rinse parts in fresh water. Insert the screen, place the O-ring in the groove of the bowl and screw the bowl on hand tight. Be sure to open the water valve before starting the engine.
  • Page 224: Bilge Pumps

    Wash the bilge with a good biodegradable household detergent or a bilge cleaner available at your Nautique dealer or a marine supply store. Rinse with water with your bilge pumps running. If your pumps seem to lag, remove the top of the pump from the base and check the impeller to make sure there is no debris inside.
  • Page 225: Cartridge Replacement

    Care and Maintenance Cartridge Replacement 1. Turn off power to the bilge pump. 2. Unscrew the filter bowl (A) by turning counterclockwise and pour any excess bilge water remaining in the bowl back into the bilge. 3. Remove the used cartridge (B) and dispose of in a suitable container.
  • Page 226: Propeller

    Section 7 Propeller CAUTION • A propeller can be very sharp. Be careful when you handle it. Wear a pair of protective gloves when handling any propeller. • Remove your key from the ignition and remove the Emergency Stop Switch clip from the switch to prevent accidental starting of the engine.
  • Page 227: Installation

    Care and Maintenance Installation Before placing the propeller on the shaft, look at the keyway on the shaft and in the propeller. Make sure the key slides freely in the shaft keyway and the propeller keyway. DO NOT use the propeller nut to advance the prop onto shaft.
  • Page 228: Quick Oil Drain System

    Section 7 Quick Oil Drain System Change the engine oil after the first 25 hours of operation, then after every 50 hours. The boat must be removed from the water to use the quick oil drain system. There is a drain hose attached to the bottom of the oil pan with a small plug screwed into the loose end of the hose.
  • Page 229: Salt Water Boating

    Nautique offers an optional fresh water flush kit. The relief valve in this kit prevents excessive water pressure to your engine. Excess water pressure can damage the engine. This is the only system we recommend if you use your boat in salt water or unusual water conditions.
  • Page 230: Coastal Edition

    9. Remove the water supply hose and reinstall the deck fitting cap securely. Coastal Edition Nautique boats with the Coastal Edition are equipped to effectively resist saltwater corrosion while maintaining premium performance capabilities. Follow these procedures to help keep your Nautique boat operating efficiently.
  • Page 231: Battery Maintenance

    4. Flush the engine with fresh water after each use. See Freshwater Flushing Kit - Optional on page 7-9 for more information. 5. Nautique Boat Company, the manufacturer of Nautique boats, applies dielectric grease to the battery connections at the factory.
  • Page 232 Section 7 Take care when connecting or disconnecting a battery charger. Be sure the charger is turned OFF and unplugged from power source when you clip ON/OFF the connecting clamps. Make sure you have a solid connection with the charging clamps. Poor connections are common causes of electrical arcs and engine problems.
  • Page 233: Battery Cable Warning Alarm

    Alarm sounds if battery leads are reversed. Nautique has included a Warning Alarm in the battery cable system that sounds an audible alarm if the positive or negative battery cables touch the opposite connecting post on the battery (reverse polarity situation).
  • Page 234: Gelcoat Maintenance

    Some of these can be caustic. Pay special attention to the cautions on the label of these coatings. Ask your Nautique dealer for advice on which work best in your area.
  • Page 235: Care Of Metal

    If your boat’s gelcoat develops a chalky look over a period of time due to exposure to sun, there are gelcoat buffing and polishing compounds available at your Nautique dealer and marine supply stores. DO NOT use common household scouring pads or powders.
  • Page 236: Care Of Glass

    Cleaning Nautique has selected the finest marine grade vinyl for your Nautique. It is important to keep it clean at all times. There are some substances that will stain the vinyl if you leave them on for even a short period of time. Remove any contaminant and clean the area immediately.
  • Page 237 Care and Maintenance Common stains and steps to treat: Step #1 Step #2 Step #3 Chewing gum D then A Eye shadow E then B Engine oil Spray paint Mildew or wet leaves * Shoe polish * Yellow mustard Oil based paint (fresh) Oil based paint (dried) Suntan lotion * Tar/Asphalt...
  • Page 238: Tunable Rudder

    Section 7 Tunable Rudder The Tunable Rudder* is designed to offer easy steering adjustment. This system uses a composite tuning foil which is located at the upper aft corner of the rudder blade. Use a Phillips head screwdriver to adjust the foil.
  • Page 239: Rudder Remote Lube Fitting (If Equipped)

    Care and Maintenance Rudder Remote Lube Fitting (if equipped) The remote lube fitting allows for easy access to lubricating the rudder. The remote lube fitting is located on the port stringer under the aft removable floorboard. Use a quality marine grease and gun.
  • Page 240: Shift Cable

    Section 7 Oil Fill/Drain Oil Fill/Drain Plug Plug Raw Water Drain Plug CORC210 Shift Cable Lubricate pivot points and exposed cable with SAE 30W-30 engine oil. LUBRICATION POINTS CORC211 7-20...
  • Page 241: Troubleshooting

    Troubleshooting The following chart will assist you in finding and correcting minor problems with your Nautique boat. Refer to your engine operation and maintenance manual for more detailed information for any problem concerning the starting, shifting or operation of the engine.
  • Page 242: Trouble Check Chart

    Section 8 Trouble Check Chart Performance Symptom Possible Cause Starter motor will not operate • Shift handle not in NEUTRAL • Battery disconnect switch OFF • Battery and electrical connection loose or corroded Engine will not start • Emergency stop switch not in place •...
  • Page 243: Electrical

    Troubleshooting Electrical Symptom Possible Cause Electrical problem • Open circuit breaker or blown fuse • Loose wiring connection • Defective switch or gauge Dim or no lights • Open circuit breaker tripped or in OFF position • Battery discharged...
  • Page 244 Section 8 NOTES...
  • Page 245: Storage

    Section 9 Storage Lifting Rings Your Nautique is equipped with bow and stern lifting rings. These are designed to lift your boat in a steady and secure manner. The winch, hooks and other components of the lifting mechanism have sufficient capacity sufficient for your boat. Refer to Section 2, Specifications.
  • Page 246 Section 9 CAUTION Drain the bilge and / or launch control system and/or aftermarket water bladder(s) to eliminate excess water before you lift the boat. Only use a hook that will pass easily through the lifting ring without binding. A hook that is too large or off-center could break the lifting ring.
  • Page 247: Winterizing Your Boat

    When storing your boat up on a rack system, it is important that the racks adequately support the hull bottom. If you do not have a trailer, support the boat like a Nautique dealer recommended trailer. It is important to have an even weight distribution.
  • Page 248: Winterizing The Heater System (In Closed-Cooled Engines Only)

    Section 9 The raw water strainer bowl (A) remains full of water even after the rest of the engine cooling water system is drained. To properly winterize your boat, the strainer must be removed and emptied. DO NOT lose the rubber O-ring (B) that seals the bowl to the cap. Clean screen (C) if required.
  • Page 249: Check For Water In Your Fuel System

    Check your Fuel Control Cell once each year for signs of water in the canister. If it appears there is water buildup in the canister, see your Nautique dealer for service. An empty fuel tank can accumulate water inside by changing temperature and repeated cycles of condensation on the inner surfaces of the tank.
  • Page 250 Section 9 Add a good quality fuel stabilizer to the fuel prior to winterizing to slow down the rate of fuel decomposition. You can purchase a fuel stabilizer at your servicing dealer, most marinas or an auto supply store. Add the stabilizer to the tank. If you did not add the stabilizer previously, run the engine to circulate fuel throughout the system.
  • Page 251: Trailer/Trailering

    Storage Trailer/Trailering Hitch If you do not already have a trailer hitch installed on your vehicle, go to a reputable installer to have the proper size hitch installed. Always use a hitch rated with the appropriate capacity to match the trailer and boat’s gross weight.
  • Page 252: Towing Your Boat

    Section 9 Towing Your Boat Read this checklist prior to trailering your boat. • Check wheel lug nuts for tightness. • Be sure the trailer tongue is securely on the hitch and the safety chains from the trailer are secured to the vehicle. •...
  • Page 253: Long Trips

    Storage Long Trips DO NOT use your boat and trailer to haul excessive gear. Each time you stop on a long trip, check the following: • Make sure the wheel lug nuts are tight and the bearings are lubricated. • Make sure the boat is still positioned snugly against the bow stops.
  • Page 254 Section 9 NOTES 9-10...
  • Page 255: Glossary

    Glossary ABYC – American Boat and Yacht Council, Inc. AFLOAT – On the water. AFT – Toward the rear or stern of the boat. AGROUND – Touching bottom. AMIDSHIP – Center or middle of the boat. ANCHOR – (1) An iron casting shaped to grip the lake bottom to hold the boat.
  • Page 256 CAST-OFF – To unfasten mooring lines in preparation for departure. CATHODE – An electrode carrying a negative charge. CAVITATION – A phenomenon in which low pressure within a liquid allows vapor bubbles to form. CENTER LINE – A lengthwise imaginary line which runs fore and aft with the boat’s keel.
  • Page 257 Glossary HYPOTHERMIA – A physical condition where the body loses heat faster than it can produce it. IN-LINE FUSE – A type of protective fuse located in the power wire of a direct current (DC) circuit usually near the battery. KEEL –...
  • Page 258 RUDDER – A vertical metal device used to steer the boat RULES OF THE ROAD – Regulations for preventing collisions on the water. SACRIFICIAL ANODE – Metal parts fitted to the hull of boat to provide a transfer of ions to the cathodic part of an electrolytic coupling and so protect other parts of the boat that would otherwise waste away through electrolysis SLIP –...
  • Page 259: Warranty

    NAUTIQUE LIMITED WARRANTY (Nautique Boats as Originally Manufactured by Nautique Boat Company) The Nautique warranty is backed by a tradition of boat building experience since 1925 Lifetime Limited Warranty: Nautique Boat Company, Inc, exclusive manufacturer of Nautique, and also referred to as Nautique herein, warrants to the original...
  • Page 260: Boat Five (5) Year Transferable Limited Warranty

    Warranty: Nautique warrants to the original user or purchaser, whichever comes first, of each new Nautique boat that the gel coat, under normal authorized use, shall remain free from defect in material and workmanship (including cracks not caused by negligence, impact or collision) for a period of three (3) years from date of delivery.
  • Page 261 Any defect or damage covered by this warranty shall, at the discretion of Nautique be repaired free of charge at an authorized dealership or service facility. Repairs will be warranted only for the remainder of the original warranty period. Transportation and/or labor to and...
  • Page 262: Procedure

    Procedure: In the event your Nautique boat has a claim covered by this warranty, the following procedure shall be allowed to secure performance of warranty obligations: 1.
  • Page 263: Nautique Coastal Edition Limited Warranty

    NAUTIQUE COASTAL EDITION LIMITED WARRANTY (Nautique Boats as Originally Manufactured by Nautique Boat Company) The Nautique warranty is backed by a tradition of boat building experience since 1925 Lifetime Limited Warranty: Nautique Boat Company, Inc, exclusive manufacturer of Nautique, and also referred to as Nautique herein, warrants to the original...
  • Page 264: Boat Three (3) Year Transferable Limited Warranty

    Gel Coat One (1) Year Non-Transferable Limited Warranty: Nautique warrants to the original user or purchaser, whichever comes first, of each new Nautique boat that the gel coat, under normal authorized use, shall remain free from defect in material and workmanship (including cracks not caused by negligence, impact or collision) for a period of one (1) year from date of delivery.
  • Page 265 Any defect or damage covered by this warranty shall, at the discretion of Nautique, be repaired free of charge at an authorized dealership or service facility. Repairs will be warranted only for the remainder of the original warranty period. Transportation and/or labor to and...
  • Page 266 Note: This warranty is expressly conditioned upon the completion and return of the warranty registration card to Nautique. Although not obligated to and without creating such an obligation, this will enable us to notify you of any necessary performance or safety modifications to your boat and to verify ownership in case a warranty claim is filed on your boat.
  • Page 267: Procedure

    Warranty Procedure: In the event your Nautique boat has a claim covered by this warranty, the following procedure shall be allowed to secure performance of warranty obligations: 1. Notify the selling dealer in writing within thirty (30) days after the discovery of any claimed defect.
  • Page 268 (no labor) will be transferred upon the receipt and verification of: (1) this completed form, (2) a copy of the purchase receipt, (3) a payment of $300.00 to “Nautique Boat Company, Inc.”. This data MUST BE RECEIVED WITHIN 15 DAYS OF THE SALE DATE. The warranty will be transferred retroactive to the sale date.
  • Page 269 (1) this completed form, (2) a copy of the purchase receipt, (3) a payment of $300.00 to “Nautique Boat Company, Inc.”. This data MUST BE RECEIVED WITHIN 15 DAYS OF THE SALE DATE. The warranty will be transferred retroactive to the sale date.
  • Page 270 NOTES W-12...

Table of Contents