Headlamps, Front Turn Signal, Sidemarker, And Parking Lamps; Taillamps, Turn Signal, And Stoplamps - GMC Envoy Owner's Manual

Headlamps, Front Turn Signal,
Sidemarker, and Parking Lamps
To replace a headlamp, front turn signal/parking or
sidemarker bulb, do the following:
1. Open the hood. Hood Release on page 5-10 for
more information.
2. Lift the inner quick release clips.
3. Pull the headlamp assembly away from the vehicle.
4. Remove the cover from the headlamp bulb.
5. Disconnect the wiring harness.
6. Remove the bulb that needs to be replaced by
turning the socket counterclockwise.
7. Replace the old bulb with a new one.
8. Reinstall by reversing Steps 1 through 6.
5-50
Taillamps, Turn Signal, and
Stoplamps
To replace a stoplamp/taillamp or turn signal bulb, do
the following:
1. Open the liftgate. See Liftgate/Liftglass on
page 2-13 for more information.
3. Pull the assembly away from the vehicle.
2. Remove the two
screws from the
taillamp assembly.