Basic Operations; Turning On The Power - JVC KD-SX50M Instruction Manual

1

Turning on the power

1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
To operate the tuner (FM or AM),
see pages 7 – 9.
To play a CD,
see pages 10 – 12.
To operate the CD changer,
see pages 17 – 20.
To operate the external component (LINE IN),
see page 21.
3
Adjust the volume.
3
To increase the volume
To decrease the volume

BASIC OPERATIONS

Volume (or audio) level indicator
4
Adjust the sound as you want.
(See pages 13 and 14.)
To drop the volume in a moment
Press briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial, you can also restore
the sound.
To turn off the power
Press and hold
second.
"SEE YOU" appears, then the unit turns off.
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
CAUTION on Volume Setting:
Discs produce very little noise compared with
other sources. If the volume level is adjusted for
the tuner, for example, the speakers may be
damaged by the sudden increase in the output
level. Therefore, lower the volume before playing a
disc and adjust it as required during playback.
2
(see page 15)
Volume level appears.
for more than one
5