Hitachi CP-AX2503 User Manual page 34

EASY MENU
Item
PICTURE MODE
ECO MODE
INSTALLATION
RESET
FILTER TIME
LANGUAGE
ADVANCED MENU
EXIT
34
Using the ◄/► buttons switches the picture mode.
The picture modes are combinations of GAMMA and COLOR TEMP
settings. Choose a suitable mode according to the projected source.
NORMAL ó CINEMA ó DYNAMIC ó BOARD(BLACK)
DICOM SIM.
PHOTO ó DAYTIME ó WHITEBOARD ó BOARD(GREEN)
• When the combination of GAMMA and COLOR TEMP differs
from pre-assigned modes above, the display on the menu for the
PICTURE MODE is "CUSTOM". Please refer to the GAMMA and
COLOR TEMP (35, 36) items in PICTURE menu.
• Lines or other noise might appear on the screen when this function
is operated, but it is not a malfunction.
• DICOM SIM. is the projector's DICOM
Communication in Medicine") simulation mode. This mode
simulates the DICOM standard, which is a standard applicable to
digital communications in medicine, and can be useful for displaying
medical images, such as X-rays photos. This projector is not a
medical device and is not compliant to the DICOM standard, and
neither the projector nor the DICOM SIM. mode should be used for
medical diagnosis.
Using the ◄/► buttons changes the eco mode setting.
See the ECO MODE item in SETUP menu (48).
• When the ambient temperature is around 35 to 40°C, the
brightness of lamp is reduced automatically.
Pressing the ► button displays the INSTALLATION dialog.
See the INSTALLATION item in SETUP menu (49).
Performing this item resets all of the EASY MENU items except the
FILTER TIME and LANGUAGE.
A dialog is displayed for confirmation. Selecting the OK using the ►
button performs resetting.
The usage time of the air filter is shown in the menu.
Performing this item resets the filter time which counts usage time
of the air filter.
A dialog is displayed for confirmation. Selecting the OK using the ►
button performs resetting.
See the FILTER TIME item in OPTION menu (61).
Using the ◄/► buttons changes the display language.
See the LANGUAGE item in SCREEN menu (53).
Press the ► or ENTER button to use the menu of PICTURE,
IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK or
SECURITY.
Press the ◄ or ENTER button to finish the OSD menu.
Description
®
("Digital Imaging and