Vivotek FD8133V User Manual page 35

NOTE
► If the default ports are already used by other devices connected to the same router, the Network
► If UPnP is not supported by your router, you will see the following message:
Error: Router does not support UPnP port forwarding.
► Steps to enable the UPnP
Control Panel, then click Add or Remove Programs.
2. In the Add or Remove Programs dialog box, click Add/Remove Windows Components.
3. In the Windows Components Wizard dialog box, select Networking Services and click Details.
user interface on your computer:
VIVOTEK
User's Manual - 35