Specifications - JVC RX-5022RSL Instructions Manual

Specifications

Amplifier
Audio
Audio Input Sensitivity/Impedance (1 kHz):
Audio Input (DIGITAL IN)* :
Audio Output Level:
Signal-to-Noise Ratio ('66 IHF/DIN):
Frequency Response (8 Ω):
Video
Video Input Sensitivity/Impedance:
Composite video:
Video Output Level/Impedance:
Composite video:
Synchronization:
Signal-to-Noise Ratio:
FM tuner (IHF)
Usable Sensitivity:
50 dB Quieting Sensitivity:
Signal-to-Noise Ratio (IHF-A weighted):
Total Harmonic Distortion:
Stereo Separation at REC OUT:
Alternate Channel Selectivity:
Frequency Response:
AM tuner
Usable Sensitivity:
Signal-to-Noise Ratio:
General
Power Requirements:
Power Consumption:
Dimensions (W x H x D):
Output Power
At Stereo operation:
Front channels:
At Surround operation:
Front channels:
Center channel:
Rear channels:
CD, TAPE/CDR, TV SOUND, VCR, DVD:
Coaxial: DIGITAL 1 (DVD):
Optical: DIGITAL 2 (CD):
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz).
TAPE/CDR, VCR:
CD, TAPE/CDR, TV SOUND, VCR, DVD: 87 dB/67 dB
CD, TAPE/CDR, TV SOUND, VCR, DVD: 20 Hz to 20 kHz (±1 dB)
Tone Control: Bass (100 Hz):
Treble (10 kHz):
VCR, DVD:
VCR, MONITOR OUT:
Negative
45 dB
Tuning Range: 87.50 MHz to 108.00 MHz
Monaural:
Monaural:
Stereo:
Monaural:
Stereo:
Monaural:
Stereo:
35 dB at 1 kHz
45 dB: (±400 kHz)
30 Hz to 15 kHz: (+0.5 dB, –3 dB)
Tuning Range: MW:
LW:
Loop antenna:
50 dB (100 mV/m)
AC 230V
200 W (at operation)
2 W (in standby mode)
435 mm x 146.5 mm x 416 mm
(17 3 / in. x 5
16
Mass: 8.8 kg (19.5 lbs)
Designs & specifications are subject to change without notice.
100 W per channel, min. RMS, both channels driven into 8 Ω at
1 kHz with no more than 0.9% total harmonic distortion.
(IEC268-3/DIN)
100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no
more than 0.8% total harmonic distortion.
100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than
0.8% total harmonic distortion.
100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no
more than 0.8% total harmonic distortion.
17.0 dBf (1.95 µV/75 Ω)
21.3 dBf (3.2 µV/75 Ω)
41.3 dBf (31.5 µV/75 Ω)
78 dB at 85 dBf
73 dB at 85 dBf
0.4% at 1 kHz
0.6% at 1 kHz
522 kHz to 1 629 kHz
144 kHz to 288 kHz
400 µV/m
, 50 Hz
13 / in. x 16 7 / in.)
16 16
220 mV/47 k Ω
0.5 V (p-p)/75 Ω
–21 dBm to –15 dBm (660 nm ±30 nm)
220 mV
±10 dB
±10 dB
1 V (p-p)/75 Ω
1 V (p-p)/75 Ω
32