Table of Contents
Advertisement
1-8
Keys, Doors and Windows
4. Place the new transmitter into
the transmitter pocket. The
transmitter pocket is inside the
center console storage area
located between the driver
and front passenger seats.
The storage area will need to
be opened and the storage
tray lifted up to access the
transmitter pocket.
5. Press the ignition. When the
transmitter is learned the DIC
display will show that it is ready
to program the next transmitter.
6. Remove the transmitter from
the transmitter pocket and
press
on the transmitter.
To program additional
transmitters, repeat Steps 4
through 6.
When all additional transmitters
are programmed, press and hold
the ignition for 5 seconds to exit
programming mode.
Starting the Vehicle with a Low
Transmitter Battery
If the transmitter battery is weak,
the DIC may display No Remote
Detected when you try to start the
vehicle. The Replace Battery in
Remote Key message may also
be displayed at this time.
To start the vehicle:
1. Open the center console storage
area and the storage tray.
2. Place the transmitter in the
transmitter pocket.
3. With the vehicle in P (Park) or
N (Neutral), press the brake
pedal and the START button.
Replace the transmitter battery
as soon as possible.
Advertisement
Chapters
Table of Contents
