Panasonic Diga DMR-BCT820 Operating Instructions Manual page 97

7.1ch Audio Reformatting
[BD-V]
Surround sound with 6.1 ch or less is
automatically expanded and played back at
7.1 ch.
• If "Off" is selected, sound is played over the
original number of channels. (Note that in
the case of 6.1 ch audio, playback will be at
5.1 ch)
Audio reformatting is enabled in the following
cases:
- When you have selected "PCM" in "Digital
Audio Output". (
- When the audio is Dolby Digital, Dolby
Digital Plus, Dolby TrueHD or LPCM.
Contents Type Flag
If "Automatic" is selected, the optimal method
of playback depending on the TV (e.g.
cinema) will automatically be selected (only
when the TV supports Contents Type Flag).
VIERA Link
Select "Off" when you do not want to use
"HDAVI Control".
AV1 Output
Set according to the terminal of the connected
TV.
94)
AV2 Settings
AV2 Input
Set according to the output from the external
equipment.
Ext Link
Set "Ext Link 1" when a Set Top Box which
transmits a control signal via the 21-pin Scart
cable is connected.
• This setting cannot be made when "TV
System" is set to "NTSC" (
Common Interface
Access to software contained on CI module.
( 14)
• Select "Slot 1:" or "Slot 2:" and press [OK].
Follow the on-screen instructions.
• This setting cannot be made when "TV
System" is set to "NTSC" (
• On-screen instructions may not correspond to the remote
control buttons.
• For more information about TV service, please contact
your service provider.
• Depending on the card, in some cases its use together
with this unit may be limited or not possible.
Convenient functions
96).
96).
97
VQT4G51