Siemens Gigaset C470 IP User Manual page 24

Making settings for VoIP telephony
¤
Start the Web configurator with the IP address.
¤
If no connection can be established, change the settings on the router (activate DHCP
server) or the phone's IP address.
Provider registration failed!
u
Your personal data for registering with the VoIP provider may have been entered incom-
pletely or incorrectly.
¤
Check your entries for Username,
check your use of upper and lower case.
To do this, open the following menu on your handset:
¢
v Ð
Settings
(see page 106)
u
The server address for the VoIP server has not yet been entered, or has been entered
incorrectly.
¤
Start the Web configurator.
¤
Open the following Web page:
¤
Click the Edit button next to the first VoIP connection.
¤
Edit the server address where necessary.
Please note:
If port forwarding is activated on your router for the ports that have been registered as the SIP port
(Standard 5060) and the RTP port (Standard 5004), it is advisable to deactivate DHCP and assign the
phone a static IP address (otherwise you may not be able to hear the other party during VoIP calls):
– Assign IP address via the handset menu:
£ £
v Ð
Settings
Or
– Assign IP address via the Web configurator:
¥
Open the following Web page:
¥
Select
IP address
Please note that the IP address and subnet mask depend on the router's address block.
You must also enter the standard gateway and DNS server. The IP address for the router is generally
entered here.
Authent. Name
¢ ¢
Telephony VoIP
Settings
£
Base Local Network
£
Settings
type.
and
Authent.
(Enter system PIN)
¢ ¢
Telephony Connections.
IP Configuration.
First steps
Password. In particular,
¢
Provider Registr.
23