Network Camera - Panasonic TC-P58V10 Operating Instructions Manual

Network Camera

You can operate the Network camera from TV's remote and also check the images from Network camera
on your TV
Basic operation for Network camera
Preparations
Internet connections (p. 29)
Example of Network Camera connection (p. 31)
Network setting (p. 44)
Before connecting a Network camera to the TV, please complete the "IP setting" and run
a "Connection test" (p. 44)
Note
This feature is only available with Panasonic-made network cameras released after
summer 2009. (Preliminary model numbers: BL-C210A and BL-C230A) A number of
VIERA-compatible network cameras can be founded at the following sites:
http://www.panasonic.com/
http://panasonic.net/pcc/products/netwkcam/
With all connected equipment turned on
Start up Network camera
If there is no registered camera displayed, please set it in "Network Camera"
settings. (p. 31)
Select "Network Camera" in "VIERA Link"
There is also an option to start with sensor detection.
View
Multi screen (Still image) Without Default camera (Default camera setting (p. 31))
Multi screen
Camera name
Camera 1
Model
BL-C210A
Select OK
RETURN
R 4 cam / 8 cam
Single screen With Default camera (Default camera setting (p.31))
■
Press to exit from
a menu screen
■
Press to return
to the previous
For more details on setting and operation of the Network camera, please also
read the operating manuals for the Network camera.
screen
30
Using VIERA TOOLS
(p. 21)
Record now
Stop recording
VIERA Link control
Network Camera
Speaker output
TV
4 split screen 9 split screen
Multi screen
(1/4) (1/9)
Camera name
Camera 1
Model
BL-C210A
Select OK 1 - 9
RETURN
R 4 cam / 8 cam
select
ok
Single screen
Camera name
Camera 1
Model
BL-C210A
Pan
Tilt
RETURN
1 - 9 Preset position
0 Home position
Back of the TV
Cable/DSL
modem
Display Menu
select
Select "Setup"
ok
Menu
Picture
Audio
VIERA Link
SD card
Closed caption
Setup
Select "Network cameras list"
Setup
Network
VIERA Link settings
Camera
Network setting
setting
VIERA CAST setting
Network cameras list
If there is no registered camera
Select "Yes" to start search
Please refer to camera's settings and enable its link
mode.
Start searching for network camera?
Yes
Set Network Camera setting
Network cameras list
Camera name
Camera 1
...
...
...
...
...
...
...
Select OK
RETURN
R
Find cameras
B Disconnect
Example of Network Camera connection
Network Camera
Ethernet
cable
LAN
Internet equipment
Router
Internet
■
Network Camera setting operation
Network cameras list
Camera name
Camera 1
...
...
...
...
...
...
select
...
Select
ok
R Find cameras
B Disconnect
"Please refer to camera's settings and enable its
link mode. Start searching for network camera?"
select
2/2
ok
"Remove camera information?"
select
"Disconnect to camera?"
No
ok
"Set this camera as default camera?"
select
Model Status Default
BL-C210A Connected
... ...
...
...
... ...
...
...
...
... (Available only when reconnecting)
... ...
"Connect to Camera?
... ...
G
Delete
Y Default camera
Set Internet setting (LAN) for
connected equipment with Internet
equipment if you need to.
* You cannot set Internet setting
from this TV
Model Status Default
BL-C210A Connected
... ...
... ...
...
...
...
...
...
...
...
...
... ...
OK
RETURN
G Delete
Y Default camera
"Yes" to start camera search.
Before you start to search for a
camera, switch the camera to
registration mode. (For this operation,
please refer to the operating manual
for the Network camera.)
Search condition also depends on
"Network setting" (p.44)
"Yes" to delete camera information.
"Yes" to delete camera connection.
"Disconnected" will be displayed in
"Status"
"Yes" to set to the default use.
Displayed "(Default)" next to camera
name.
"Yes": "Connect" will be displayed
in "Status" (Attach up to 8 Network
cameras simultaneously)
31