Volkswagen Golf 2004 Service Manual page 91

– Both parts of housing must be flush -arrows-.
Check if parts of housing -1- and -2- are flush (front part)
– Both parts of housing must be flush -arrows-.
– Tighten bolts -arrows- to max. 2 Nm.
Note
Tighten bolts evenly and alternately so that both parts of housing
do not cant.
– Install engine cover
4.25.6 Removing and installing air filter ele‐
ment: 3.2 l engines
Special tools and workshop equipment required
♦ Spring-type clip pliers -VAS 6499-
Removing:
– Open hose clip -B- using spring-type clip pliers -VAS 6499-
and pull air intake hose off.
– Release air mass meter connector -A- and pull off.
– Remove securing bolts -arrows-.
– Lift filter housing upper part and remove upwards.
⇒ page 89 .
Golf 2004 ➤ , Golf Plus 2005 ➤
Maintenance - Edition 11.2009
4. Descriptions of work
87