MHSC WMC36 Operating Manual page 21

(Chimney Components con't.)
Component
Square Chase Termination
Adapter Kit
Chimney Support
Firestop
Radiant Shield
Attic Insulation Shield
(3-wall) (CF-11)
Canada
Chimney Collar Enclosure
(SK8)
Attic Insulation Shield
(SK8)
SK8 Chimney Sections
45 Chimney Elbows
Chimney Sections
(3-wall)
Attic Insulation Shield
(3-wall) (CF-11)
20000583
Description
Square chimney cap used to terminate chimney
through chase. Includes adapter.
(Flashing material)
Required to unite 3-wall chimney with S20BR,
S20BT, S20BW Traditional Top Housing
Used to support the chimney at each 30' of
of vertical height above the hearth and
at every 6' of inclined chimney run.
Each support adds 2Z\x" to chimney length.
Required at each floor level and attic on
multi-story installation.
Used as an alternate to FS2A firestop to
reduce the clearance from the chimney to
combustible framing. With 16" center lines.
Used to prevent attic insulation from
contacting the chimney system.
Installs on the "over the chimney collar" of the
fireplace; provides outside air to assist in cooling
the chimney system.
Used to prevent insulation from coming in
contact with the chimney system.
Used to build chimney systems exposed above
roof.
Provides 45° offset and return. For Canadian
installations only. For use with SK8 chimney only.
(Maximum use of 2, or 1 pair.)
Used to build chimney systems exposed above
roof.
Used to prevent attic insulation from
contacting the chimney system.
WMC Series Woodburning Fireplace
Model Number
SLTS8
S20UB
TCS8A
FS2A (8" straight flue)
FS6A (8" 30° inclined
flue)
RS-8A
FS2100-HT
CCE-SK
AIS-SK
SK818CAN (1Z\x' Long)
SK84CAN (4' Long)
SK845/2
8" flue
818CAN (1Z\x' Long)
84CAN (4' Long)
FS2100-HT
21