D-Link DSL 320B Setting-Up Manual page 4

10.
Connect the Ethernet cable to the back of the
modem.
11.
Connect the other end of the Ethernet cable
to a free network socket on your computer.
If the LAN comes on, click Next. Otherwise see
Troubleshooting on the last page of this guide.
12.
Next, connect your modem to your broadband
enabled phone line.
13.
Plug one end of the DSL cable into the
microfilter. Then plug the microfilter into
your telephone socket.
14.
Plug the other end of the DSL cable into the
socket marked 'DSL'. The DSL light on the front of
the modem will flash and then stay on. If not, see
Troubleshooting on the last page of this guide.
15.
Next, the modem will try to detect your
4
Item code: 046330