Download Print this page
JVC KD-G207 Installation & Connection Manual
JVC KD-G207 Installation & Connection Manual

JVC KD-G207 Installation & Connection Manual

Jvc in-car entertainment installation/connection manual
Hide thumbs Also See for KD-G207:

Advertisement

Quick Links

KD-G207
Installation/Connection Manual
GET0179-002A
[EE]
ENGLISH
This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your
vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC
IN-CAR ENTERTAINMENT dealers.
Parts list for installation and connection
The following parts are provided for this unit.
After checking them, please set them correctly.
A / B
Hard case/Control panel
E
Power cord
H
Mounting bolt (M5 x 20 mm)
INSTALLATION (IN-DASH MOUNTING)
The following illustration shows a typical installation. If you have any questions or require
information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a
company supplying kits.
• If you are not sure how to install this unit correctly, have it installed by a qualified technician.
1
B
3
J
*1
C
Sleeve
F
Washer (ø5)
I
Rubber cushion
2
D
*
1
When you stand the unit, be
careful not to damage the fuse
on the rear.
*
1
C
4
!
Do the required electrical connections.
@
¤
D
B
1
D
Trim plate
G
Lock nut (M5)
J
Handles
1 8
I
4
m
m
5 3
m
C
~
m
Ÿ
H
Bend the appropriate tabs to hold
the sleeve firmly in place.
1103KKSMDTJEIN
EN, RU

Advertisement

loading

Summary of Contents for JVC KD-G207

  • Page 1 ENGLISH This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If your vehicle does not have this system, a voltage inverter is required, which can be purchased at JVC IN-CAR ENTERTAINMENT dealers. Parts list for installation and connection The following parts are provided for this unit.
  • Page 2: Troubleshooting

    Removing the unit Before removing the unit, release the rear section. When using the optional stay Fire wall Dashboard Install the unit at an angle of less than 30˚. TROUBLESHOOTING • The fuse blows. * Are the red and black leads connected correctly? •...
  • Page 3: Electrical Connections

    • Be sure to ground this unit to the car’s chassis again after installation. Notes: • Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC IN-CAR ENTERTAINMENT dealer. • It is recommended to connect to the speakers with maximum power of more than 50 W (both at the rear and at the front, with an impedance of 4 Ω...
  • Page 4 • BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car. • • Remote lead JVC Amplifier Remote lead (Blue with white stripe) LINE KD-G207 REAR FRONT •...